«Kremlin» greenhouses currently considered the most reliable and durable structures of this kind in our country.They represent a model of the original design, strong and very comfortable to use.There are several types of greenhouses, which differ in shape, color, frame, referring to the profile, and so on. D.
Main features
The basic model is the "Kremlin Suite."Greenhouse, this has a height of 2.1 m. Its length can vary - from 4 meters to infinity.But it is always a multiple of two.Greenhouse frame made of steel profiles 20 x 20 mm.Step between the intermediate farms - 1 m. Casing is made of polycarbonate.The basic model has a classic arched shape.
What is the secret of the reliability of a structure such as a greenhouse "Kremlin"?Farm in buildings of similar purpose - the most important element which is responsible for strength and durability.The stronger the structural parts, the longer the hothouse.The main feature of the greenhouse "Kremlin" is the presence of twin farms.With this structure can withstand very severe snow loads - up to 300 kg per m2.Joined by a double arc nine steel bridges.Farms teams consist of two halves.The distance between the arches in them - 10 cm. Step between the horizontal ribs - 610 mm.Thus, the size of a cell opening in the glasshouse "Kremlin" - 610 (H) x 990 (width).Building construction is carried out by means of special fasteners - "Krabs systems" or "spiders" - bolts.The frame is painted by powder technology at high temperatures.Therefore periodic updating covering farms and jumpers are not needed.
vents in the amount of 2 pieces.It equips each model, including basic "Kremlin Suite."Greenhouse also has two doors at both ends.The latter consist of three halves.This design provides for easy transportation especially for greenhouses to the destination.To carry the frame can be disassembled on the trunk conventional car.Weigh greenhouse "Kremlin" is not too much (one section - 30 kg).
Model "Star»
Structurally, this kind of system suite is almost the same.It is also a model with arched frame and double farms.The only difference is the color profile.In the base model frame brick red.The "stars" - turquoise.
Model "Tale»
«Kremlin» Galicia this variety also has a sturdy frame of twin farms.To distinguish it from the basic model to form.The roof constructions in "Fairy Tale" arch and wall - vertical.In addition, this model greenhouses have several smaller height - 195 cm width - 2.5 m.
Despite its small size, the greenhouse "Kremlin Tale" (reviews that just wonderful) gardeners have enjoyed no less popular than the "Lux".Since the walls of this model straight, plants can be planted right next to them, thus increasing the area of the beds.Thus, for smaller sizes "Fairy Tale" has the same capacity as the other varieties of "Kremlin" greenhouse.
Model "Bogatyr»
This species is an amplified version of the basic design and can withstand up to 400 kg of snow per 1 m2.Such strength is achieved at the expense of smaller steps between farms.In the model of "Bogatyr" He is 65 cm.
Other species
release another model of greenhouses "Kremlin".For example, the frame structure "Zinc" is made of galvanized steel, which extends the life of farms in humid conditions.The framework model "President" is made of stainless steel, "Premium" - galvanized and additionally painted.Model "Arrow" has a very original form, reminiscent of the old helmet with a sharp tip.The frame of this variety is made of a shaped tube 40 x 20 mm.
Greenhouse "Kremlin": reviews
opinions designs of this brand gardeners have already had time to test them, happened very well.The fact that the transport of the disassembled model "Kremlin" is not nothing complicated is already mentioned above.By the absolute advantages of greenhouses this brand consumers also include ease of assembly and installation, as well as reliability.All welded frame members performed flawlessly.When installing do not have to finish or polish.Collect such construction as greenhouse "Kremlin Suite", reviews of which are particularly enthusiastic, but any other model of this brand, you can literally 3 hours.
presence of two transoms enables high-quality ventilation, which is very beneficial for the plants.These vents, among other things, are included in the greenhouse.Most other manufacturers such option separately.Ease of use increases and two doors at both ends.The cost of construction of this brand (18 000-32 000 rub., Depending on the model and size), most gardeners are also satisfied.In any case, the quality of performance justifies it.Many gardeners such greenhouses are already several years.Information that someone had to repair them, are not available.
So, apparently, the design is really very good - greenhouse "Kremlin".Reviews of her good.Of the shortcomings of consumers say only that the transport model "Lux", "Fairy Tale", "Arrow" and "Star" will have to care.Bumps powder paint can shear.
How to assemble the greenhouse
going "Kremlin" hothouse of any model in the following way:
- installs easily stand-foundation.Of course, you can arrange a greenhouse and on the ground.However, in this case, the lower rail will quickly begin to rust.
- The ends are trimmed polycarbonate that are provided.
- Mounted arched truss.
- sheathe side.
Next look at each stage of the operation mounted greenhouses detail.
Assembly established the foundation
"Kremlin" greenhouse should be in a sunny place, if possible sheltered from the wind.Uchastochek good start mark on a "Egyptian triangle".Further, the corners and in gaps in increments of 2 meters installed bricks.Then, the timber 50 x 100 mm rail going.To brick it can be attached by conventional bolts.The main thing - to ensure that the fixing to obtain reliable.Bruce is a pre-treat with antiseptic and cover with oil, wood, lacquer or paint.Below it should advance to screw bolts (through) in increments of 50 cm. They will subsequently be attached waistrail most greenhouses.
Greenhouse "Kremlin": assembly
end members to work on cutting polycarbonate should choose a flat area.First, it keeps the sheet.The ends of the greenhouse "Kremlin" consists of three parts - the two extreme and doors.First the cutting side portions.The order of operations can not be forfeited, or polycarbonate may not be enough.Since the structural elements weigh very little greenhouse, as it is most convenient templates to use that symbol.Cutting must be carried out very sharp knife masking.
So, let us begin to understand so as mounted greenhouse "Kremlin".Assembly instructions ends:
- rounded side of the end of the sheet is applied to a right angle to the corner.
- produce cutting the first member.Polycarbonate knife cut very easily.When cutting all elements of allowances should be left 5 cm wide.
- further side of the end turns, and is applied to the opposite corner of the sheet.Cutting is performed in the same order.
- The next step is to make the elements of cladding for the second end of the greenhouse.
- to polycarbonate took less "curve" is applied to the already cut out a portion of the sheet to the top of the top.
- further cutting is performed under the door.
After that, the front end of the frame assembly.On hinges (through screws) fixed frame windows.In the same way it is fastened to the door to one of the side portions.
«Kremlin» Galicia (Photo by cutting polycarbonate ends):
Next is the end of the cladding sheets of polycarbonate.Attach them to be special roofing screws with thermowasher.In this kind of conventional fasteners plating is not fixed.The fact that the polycarbonate when the temperature of outdoor air is able to slightly expand and contract.If you fix it to the frame tightly, edging very quickly come into disrepair.It is possible to use conventional screws, but in this case between the sheets and cap should be a gap of 1 mm.The diameter of the holes in the sheets must also be slightly larger than the diameter rods fasteners.Ready wheel end is set in a strictly vertical position.For wood trim its fixed bolts, pre-drilled holes in the bottom bridge.
mounting frame and paneling
Thereafter steps for the base model of 1 m are installed in the farm.Alignment must be carried out on the level.Then proceed to the installation of horizontal jumpers.Attach them using special T-shaped "Krabs systems."
Once the main frame is ready in the manner described above, going back face.After installing it in place you can begin to trim farm polycarbonate.In this case, you do not have to cut anything.Sheets of good bend and wrap around the entire arch.Fixing them made roofing screws in increments of 50 cm. After the sides are trimmed, the operation for assembling a structure such as "Kremlin" greenhouse, can be considered complete.
Useful tips on caring for greenhouse
Manufacturer warrants greenhouse "Kremlin" in one year.However, it can last for up to 10 years.In order to maximize the service life of the structure, such recommendations should be followed:
- annually before the start of the season the greenhouse should be washed with soap and water.This operation must be carried out exclusively with a soft cloth.Stiff brush to wash polycarbonate impossible.
- in winter lingering on the walls and roof of the greenhouse should be sure to sweep away the snow.His weight, "Kremlin" survive without difficulty.However, in case of warming can be formed on the surfaces of the ice crust that polycarbonate is not too good.After all, this material is not particularly resistant to scratches.
