today still paper wallpaper are leaders in sales thanks to its undeniable advantages.They are harmless, so allow the walls to breathe, do not emit odors.The current wide range of different colors and low cost of this material can satisfy the most demanding customer.Knowing how to glue wallpaper made of paper, any host can nelenivy quite cope with this task without the help of professionals.Make it becomes even easier when you consider some tips builders on how to perform the job properly, so you can admire the walls papered with for a long time.
Preparing walls
On how carefully prepared surface of the wall, depends largely on the quality of its pasting wallpaper.To get started you want to remove all of the old coating.First they tear off dry, but that will need to wet with water and scrape off with a spatula.Moisten the wallpaper better using a brush with natural bristles.Paper surface was slightly damaged, which facilitates the absorption of water.It makes no sense to buy the advertised special gels and solutions for this purpose.As practice shows, the result of which no more than that of ordinary warm water.Remove old wallpaper must be very carefully, all without a trace.Otherwise, when applying the new coating remaining pieces away from the wall, forming bubbles.Remnants of wallpaper from the floor should be clean immediately, as long as they do not have time to dry.
After cleaning the walls need to be carefully putty all the bumps and cracks.
How to cut out the wallpaper
It is very important before you glue the paper wall, cut out them properly (cut).If they do not require the selection of the figure, then the desired length of the strip is unwound from a roll and cut.This should be done face down, leaving a small allowance for trimming.If you have a wallpaper image, you must choose the adjacent strip so that the pattern on them coincide.Very important unwinding roll in the same direction.The surface on which the cutting, they must be clean and smooth.Hold for a slice, you need to push the roll, unwinding the fabric to the desired length.Then a tape to measure the exact length and mark with a pencil.After that you should bend the strip, combining the sides and smoothing the bend on which further and made the cut.Fold fabric must-down pattern.To under its own weight wallpaper is not deformed, the number of bands in the stack should not be more than ten pieces.
Adhesive application
Glue selected according to the type of wallpaper.Typically, instructions for gluing mark indicates the recommended adhesive.For heavy coverage, for example, requires the use of a special composition intended for this type of material.
How to hang wallpaper paper that did not have them then glue?It is very important properly prepare the adhesive.Dry glue is diluted in water at room temperature.To do this in a plastic bucket or basin need to create a whirlpool with a brush on a long handle and a funnel to fill the resulting adhesive gradually, without ceasing to mix thoroughly.Breeding glue in cold water can cause lumps.A very warm water will affect the quality of the glue to the same wallpaper when applied warm composition can be melted and raspolztis to pieces after drying.
If wallpaper base paper, the glue must be applied directly onto the canvas, leaving him for a while to allow to soak.The time depends on the thickness swelling and wallpaper is usually indicated on the packaging.Denser varieties require more time for impregnation.Skilled craftsmen know how to hang wallpaper paper: it always requires a very high accuracy, t. To. These wallpapers are no different strength and durability.At the slightest careless movement, they may tear.
much easier to perform sticky non-woven wallpaper.The adhesive in this case is not applied to the web, and directly to the wall.You can use a roller or wide brush.
How to glue paper wallpaper
start wallpapering recommended from the corner closest to the window.And this should be done not from the angle.In the beginning you need a short distance away with the help of the level and hold a pencil line vertical strip along the walls.It is from this line and should start wrapping.How best to glue the paper wall?Doing it alone is much more convenient when one is on the ladder align the top part of the web, and the second track to the edge of the strip is aligned with the vertical line drawn.If by chance the front of the wallpaper glue gets, it should immediately wipe dry with a soft cloth.Skirting before pasting the walls is recommended to remove, if possible.Many people know how to glue the paper wall correctly.Nevertheless, the presence of the wall sockets and switches can create some difficulties.Before you start, similar elements to be removed, do not forget to disconnect the room.Wallpapers are glued directly on the hole for the outlet, then this place is a neat cut-out.When the work is finished, sockets and switches are set in place.
Features gluing duplex wallpaper
Duplex wallpaper are classified as heavy, so require a specialized adhesive designed specifically for such coverage.They consist of several layers of paper and topped with a special compound that protects them from the damaging effects of the environment.These wallpapers can be used even in areas with high humidity.With fairly large thickness, they can hide all fine irregularities and defects in the wall surface.Most canvas has to withstand a long time to impregnate the adhesive before stick it on the wall.There is no special recommendations on how to glue the paper wall "duplex".The principle remains the same pasting.The canvas smeared with glue, applied to the upper end of the wall, it is aligned with the edge of a vertical line drawn by then carefully ironed roller or a dry cloth.Iron movement must be done from the center to the edge of the band, achieving a dense bonding and the absence of air bubbles.
How to hang wallpaper embossed paper
Embossed wallpaper are embossed pattern that is created by using special rollers under high pressure to the paper.Through this texture is easy to hide all roughness and uneven walls.Since the embossed wallpaper, too, belong to the category of heavy for their gluing require special glue, which can add more at a dilution of PVA for reliability.
Foamed Wallpaper
These wallpapers are a variety of vinyl and are made by screen printing.They have a slightly rough, gleaming surface, perfectly concealing irregularities, it does not stretch.There are some features of how to glue paper foam wallpaper.Such wallpaper perfectly stick to any surface, be it plaster or paint.The only exception is covered with plaster or whitewashed wall.The adhesive should be used only specialist recommended by the manufacturer.Foam wallpaper is not capable of passing moisture, therefore, to prevent mold, the wall surface must be treated with antifungal impregnation.
Wallpapering butt
This method is most common, but not everyone knows how to glue the paper wall butt properly.To do this, you must follow some important rules.You start from the corner of the wall on which the window.The front page should be focused not on the angle, which can be crooked, and a plumb line or level.Wallpapers may have different characteristics, it is imperative to take into account.Each following blade is parallel to the previous so that the edge in contact as closely as possible.It should not just stick tight band to be able to correct it in one direction or another.The edges of the strips should be very good adhesive missed the mark.Vertical labels should be checked after every second line.
about how to properly wallpaper glue paper, can learn from the experts, but learn to do it perfectly, you can only empirically.
And finally, some rules to help avoid various unpleasant situations when pasting the walls.Before the operations, disconnect the electricity.Windows should be closed tightly to avoid any drafts.The room in which the repair is carried out, it should be warm and dry.
