Today Wi-Fi is in almost every home, office, shopping and entertainment centers.Thanks to Wi-Fi-networks, people can easily connect to the Internet whenever you need them.Free Wi-Fi - it is certainly convenient, but at the same time the owners of routers often worry and wonder, "How do I know who is connected to my WIFI?» This issue is quite relevant today, so it's important to understand all the nuances.
Depending on the model, a router can use the job log.But to find it quite difficult to find.The easiest way to view the status of the current time and to determine how many there are connected devices.But this method is not completely reliable, since the display information in a given period of time.
What should alert the owner of the router?
Users who access the Internet through a Wi-Fi-connection should be wary if faced with similar situations:
- speed is slow.The reasons for this phenomenon may be a lot, but better to make sure that the low rate is not caused by other people connected devices.
- Active indicator flicker.Typically, this occurs at a time when there is an exchange of information with the Internet.If all the "legal" device is not currently running, and light still lit, the user is alert.
table connected equipment
Some people use the following method to help answer the question: "How do I know who is connected to my WIFI?» To quickly check whether you have connected to Wi-Fi unscrupulous users can use the method viewTable art.To do this, you need to enter into your browser IP-address, and then run the command interpreter.This can be done as follows: go to the "Start" menu, then select "search", type «cmd» and enter «Enter».Then you need to execute a command «ipconfig».Address of the router will be displayed next to the inscription Default Gateway.
After administration login and password in the opened window you can see a list of devices that connect to the router.If IP- and MAC-addresses are not familiar, these users need to block.If necessary, it is possible to limit the time to a certain priority.
How do I know who is connected to Wi-Fi, using the settings of the router?
This method is quite simple.When the owner of the router overcome thoughts, how to check if anyone connected to my WIFI, you must go to settings and select the appropriate tab.It will display all the information.
To enter the settings panel you need in your browser to enter the numbers that appear on the back of the router.They may differ depending on the model, but most often it is 192.168.0.1 or 192.168.1.1.Also numbers, username and password can be found in the technical documentation.
When all data is entered, press OK and go to the settings of the router.First you need to enter in the "Basic Settings", then on the "Wireless Mode" and choose where the item "Statistics wireless mode."In the right part of the window that opens, you can see the number of stations connected to Wi-Fi.In this statistics, you can see the MAC-address of the device, the total number of packages and the type of encryption.
Experienced owners routers know that to solve the problem, "Check, anyone connected to my wifi» You can use the cable.For this there is a tab «DHCP», it is necessary to find the item "Client List DHCP».If you have connected devices will be displayed not only by their MAC-address and IP-address.
How to block someone else's MAC-address?
If, in search of an answer to the question "who is connected to my WIFI?» The owner found the wrong connection, MAC-address you want to block.Make it easy enough to filter out extraneous devices.To do this, go to the section "Filtering MAC-address" and select "Enable."Next button should be set to the first parameter.Then you can add someone else's address, and save the changes.This action will close the access to the Internet, and foreign device will not be able to use Wi-Fi.
How to set a password for Wi-Fi?
To protect themselves from other users, Wi-Fi it is advisable to close the password.Then, access to the Internet will be limited, and the owner will get rid of these problems, such as low-speed data transmission.
select the password you need a big responsibility to make it difficult to unravel.Simple and predictable code is unlikely to be a barrier to unauthorized users to connect to fraud.
The password is desirable to combine large and small letters, numbers and punctuation marks.It is advisable to make it as long as possible.
Scan LAN
There is another way to find out who is connected to my WIFI.It consists in scanning the network.You must enter the IP-address of a laptop or computer and select the next range.After checking should be highlighted two addresses: the connected device and a modem.If there are more - it shows that to Wi-Fi devices connected to other people.
Some users put the WEP-encrypted, but this method is unreliable.There are utilities that allow to crack the protection and connect to the Internet.WPA - is a barrier stronger, but not all older models routers support this protocol.
Wireless Network Watcher
users will be useful to know that there is a program for verification.Who is connected to my WIFI, can be determined using the Wireless Network Watcher.Download the utility better than the official site, in order to avoid various imitations.
Start program must be from the device to be connected to the router.Otherwise, no benefit from the Wireless Network Watcher will not.After scanning, you can see not only the number of connected devices and their MAC-addresses, and even the name of the manufacturer.But
disable unscrupulous users through the program will fail.To do this, go to the settings of the router and block addresses.Professionals use a special utility that allows you to determine the location of connected devices within a few meters.
way how to find out who is connected to my WIFI, quite a lot, and each user can choose the one that suits him.
