for creative people who like to diversify their bedclothes, offer an easy way to decorate your bed sheets, duvet covers, bedspreads and pillowcases original prints.
Materials:
1. Two large, whole and flat piece of cardboard.
2. At least 10 large sheets of newsprint or other paper, cutting unnecessary and sheer fabric colors of your bedding.
3. Paints for fabric: colors can be mixed, but need a lot of paint - at least in the amount of volume plastic cup.
4. The small roller and paint tray or plastic tray.
5. A knife with retractable blade breaking off or any special knife for use with cardboard and paper.
6. Large and horizontal work surface (table, floor).
7. Marker.
8. Iron.
9. Linens, blankets, bedspreads and everything you want to paint.
10. Plastic cup or glass.
instructions on painting:
1. If you want to get clearer pictures or decorate your bedding smaller prints, instead of using a large cardboard otrez linoleum - it leaves a little more expensive, but will provide you with the best quality prints.
2. Draw on your paper print, prorisovyvaya also the places where the need to cut holes - it is best if it is large and not very difficult to subsequently break and crumple cardboard, and make your "form"It does not become too thin.
3. Special knife cut out all unnecessary parts so that there is only your print made from paper.
4. Redraw ready to print from paper to cardboard and attach one to the other, and cut out the shape of prints already out of cardboard.Most change the knife blade and try to get a clear form.
5. Prepare your otrez unnecessary tissue for painting, guided by the instructions on the paint you are using for the tissue.Carefully iron the fabric of an iron, leaving no wrinkles, and place on a work surface.
6. Decide how you want to print on fabric.If you want to order prints clear, mark the fabric with a pencil or chalk, or just start painting the top and work your way down.
7. Mix and prepare more ink in a plastic cup.Check whether you need a bit of paint diluted with water, if they are too thick.
8. Pour paint into a paint tray and evenly soak in it the whole movie, which should be a lot of paint.Then start inking uniformly cardboard form, carry out a roll.
9. For imprinting prints on linen, first put a cardboard shape painted on the fabric side down, cover it with a sheet of blank paper or newspaper.With one hand firmly hold the shape on the fabric, and iron the other, pressing hard on the entire surface of the mold.
It is important that the entire form is fully printed on the fabric.Then remove the paper and carefully remove the form, one hand holding the fabric.
10. Print the print on unnecessary tissue several times before moving on to painting bedding.This will allow a well-shaped cardboard impregnated with paint, and will allow you to practice and understand how much paint you'll need to put on the board, and how much must be pressed to form the fabric.
11. As soon as you feel that you have mastered the process of painting, begin to put itself on the print bedding (previously preparing it in the same way as the first fabric).
your cardboard form should be enough to paint one side of the sheets or blankets.If you want to paint both sides of the laundry zagotovte two forms, as the first break starts after about 30 times of use.
12. During the painting is constantly changing sheets on a clean, pressed to form a fabric.Try to avoid dripping paint on the cloth.
13. Leave your laundry or dry blanket.
14. Be sure to carefully read the instructions for use of paints for fabric - it will allow you to correctly determine the correct amount of paint you that after washing your prints do not fade.
on materials designspongeonline.com.
Photo source: designspongeonline.com
