darkening of silver contributes to a number of factors.This improper storage, and its reaction to sulfur and sulfur-containing components, and the individual characteristics of the owner, and even the trial of the precious metal.Often the question arises, why some owners of silver blacken quickly, while others are stored for decades in good condition.The answer is much simpler than it may seem.People, whose sweat has a high sulfur content, it is much more likely to experience the urgent need to learn how to clean silver.
There are several effective ways to clean the popular silver jewelry that is available to each of us.Let us examine them in detail.
How to clean silver: use ammonia
This is a very common method, which uses most of the owners darkened silverware.To clean the metal you need ammonia 10% sold in any drugstore.Pour the alcohol into the container, place the silverware back and soak them for 15 minutes.Then rinse with water and dry the silver.A very good way, which takes a minimum of time and money.
How to clean silver: use sulfuric acid
This method is advisable for those who have the opportunity without problems to get sulfuric acid, or you have it already available.For example, sulfuric acid can be diluted with water to the battery to obtain a solution of 10%.The acid should be boiled silverware, then washed with water.Of course, the whole process should be done with gloves - though the solution consistency and weak, but the owners of sensitive skin it is better not to risk it.
How to clean silver: use citric acid
Another affordable and effective way to clean silver jewelry with citric acid, which you can buy in the powder department with spices and herbs in almost any supermarket.Take a glass jar 1 liter and pour into it half a liter of water.Citric acid (100 g) in water vsypte.Bank to put in a water bath.Cut a piece of copper wire and drop into the water.A better bend the wire and hook one end of the neck of the banks so that it came from a kind of "fishing rod", with which you can get the product in the process of boiling to monitor the purification process.Typically, purification using silver citric acid required 15 to 30 minutes (depending on the degree of "blackening" of the metal).
How to clean silver: use soda
in the bucket, pour half a liter of water and sprinkle in there a couple of table spoons of food soda.The solution stir and put on fire.Once the liquid comes to a boil, throw in a bucket a piece of foil, which is used for baking dishes in the oven.Following the foil, place in the water with baking soda silver products that need to be cleaned.Even after 10-15 seconds, you can get clean and shiny silver, which can only be washed with water.
How to clean silver: use a Coke
turns, Coca-Cola, the number of drink, copes with the blackening of silver.Just boil silverware in Coca-Cola for five minutes.
How to clean the blackened silver: use salt
And here's another very simple way to clean silver by using available tools.In this case you need an ordinary salt.In the bucket, pour water (200 ml) and put a teaspoon of salt.Salt solution mix and place the silverware.After a few hours you can get purified precious metal.One drawback - the process takes a long time.But to accelerate it, you can do so, as in the previous tip, that is boiled in water silver for 15 minutes.
original way to clean silver: use lipstick
This method is to use a lipstick and a toothbrush to clean silverware.After the procedure, wash silver water.
