Most car lovers do not mind a bit of traveling and something else.We are not talking about a different make or model, we are talking about a completely different form of transport - a motorcycle.By car mechanics a very important role is played by the correct gear shift.On a motorcycle it is necessary to pay more attention.
fact that car engines are composed of a lot of cylinders, their capacity is very high now account goes on hundreds of liters and horsepower.
Motorcycles also typically have more than two cylinders, so you need to observe such simple things as suitable modes for the engine as well as the order of shifting.In principle, it is not difficult, as they say, a matter of practice.Of course, there is that just want to enjoy the swiftness and speed.Then, shifting gears on a motorcycle is carried out at maximum speed.Of course, not all motorcycles are equipped with tachometers, but good "rider" on a sound can determine the right time switch.
Modern bikes are equipped with four-stroke engines, which have a maximum torque at medium speed.But this does not mean you have to upshift on them.There is no instruction that would generalize at least two traffic situation, because they are all different and have a load on the engine and diversified.In this case, you need to focus on it.If you switch from first gear to fourth, you will notice a gradual drop in revolutions, because the load is too large and the torque is simply not enough to disperse.So do not forget about such a concept as downshifts.Gear shifting on a motorcycle is not always increasing, is such that to increase the speed on the contrary necessary to "roll back".
In this case, be prepared for a sharp increase in engine speed and bring them back to normal.Transmission motorbike recently has five, and then six steps, as previously there were only four.As a result - a big gap between the gear ratios, which affects the dynamics of dispersal.
correct gear shifting on a motorcycle road type is particularly important, because here plays a significant role and efficiency.In order that the engine does not "devoured" oil, you need to follow a few simple rules, which include heating up to operating temperature, the use of high-quality gasoline, as well as the correct selection of the transmission, depending on the road conditions.
As for two-stroke engines, their torque increases in direct proportion to the turnover, as well as power, so here the logic is simple: the higher the turnover, the higher the dynamics of dispersal.Of course, thinking about the economy and not worth it.Moreover, such assemblies have a number of disadvantages, including low efficiency, high noise level, as well as the need for a long exhaust system, because the resistance in it is part of the engine.
Many car owners believe that if you have a car bike simply is not necessary.In fact the pleasure of driving can not be compared, because it's completely different evaluation criteria.
