During operation of the vehicle its appearance over time lose its former glory.This is due to precipitation (rain and snow), and hit the dirt on the body.In severe cases, it may be necessary to complete the painting cars.The question arises: where you can paint the car, spending a minimum of means?The first option - to use the services of professional masters.However, this service will result in a tidy sum of money.Painting can be done at home, and the results will not differ (with proper and correct approach).
Preparations
The first thing you need to start - the workplace.This could be a garage, and a special hangar.In any case, the room should not be dirty, dusty and humid.This is due to the fact that moisture and dust falling on the body, destroying the integrity of the paint.Because of what the paint will last not long.Visual inspection is important to pay attention to anything, even minor points.Responding to a question on how to paint a car with his hands, it is important to remember that the car should be thoroughly rinsed.
most vulnerable points: the wings, racks, bottom sills.They should be cleaned very carefully.External examination involves finding obvious shortcomings.This can be corroded, swollen paint bubbles, serious dents, deep scratches and chips.Upon detection of such flaws would require additional equipment: welding and Bulgarian.All problems can be solved on the spot, before applying the paint.
cleaning work surface
next step - the removal of all the elements that can not be painting.This is the case of glass, bumpers, door handles (hood, trunk), spoilers.Designated body can try to protect with adhesive tapes and films (some glass accessories that can not be removed without significant damage to them).At this stage, and straightening.This process of alignment of the body surface.It uses a conventional and pneumatic hammer.To paint the car completely and ensure the longevity of service paintwork, you must get rid of all the irregularities.The surface of the hammer must be completely smooth.Otherwise, the details will remain on the tracks that will be visible when prokraske.
Features rihtovaniya
When straightening focuses on bending metal, rapids and places where there were deep scratches.It collects dirt, and rust can be formed after painting.It is important to remember that if the car has several times been subjected to body repair, do not completely get rid of dents.The fact that after rihtovaniya metal as it is stretched.And because only straightening does not give positive results.To protect the wheel is best to buy special covers.
Grinding works Grinding is carried out using a grinder and sandpaper.Significant chips and scratches best to handle a plane metal.The places that are most exposed to corrosion, cleaned grinder.This wheel arches and the bottom.The rest of the body clean grinder.Asked about how much it costs to paint the car completely, it is important to consider their own skills.If you do not have experience cleaning metal surfaces in preparation for painting it, it is better to use the services of professional tinsmith.They produce both flattening and basic training.However, the cost of painting significantly increase.
After cleaning the metal surface must be completely cleansed of paint.If in some places, the latter is held firmly, use a special sponge (Scotch-Brite).It allows you to get rid of the glossy shine on the body.This is sufficient for the application of a new coat of paint.
Features and types of coatings for car body putty
work carried out in several stages - drawing 3-4 layers.After each layer of the body need to be sanded.This is done because after removing ink in some areas became thinner metal.If you paint the car at this point, the coating does not last for a year.There are several kinds of fillings.The most popular are the soft putty.It is used for all kinds of metal and applied an equal layer, filling the unevenness and roughness.If the body is severely damaged, repaired the dents (and even holes) can be putty with glass fibers.This material is very durable, but it is difficult to handle.Working with him is possible, only having the appropriate skills.
In general, the question of how much it costs to paint the car completely, can be answered in different ways.It all depends on the availability of the necessary tools.For example, the purchase of grinders (800 p. 2500) and Pneumatic (price from 1000 to 3000 r.) Will cost a considerable amount.Regarding putty material, it contains a sufficient amount in the construction market.Consumption of putty (the average size car class "sedan") will be 1.5 kg per square meter.Accordingly, the need for at least 7 kg of material for quality work.Do not forget about the dirt road.In the car as a whole will need about 700 grams.The total cost of the preparatory work on alignment, coats and fillings (for economic use) amount to 7,000-9,000 rubles.Depending on the quality of rihtovaniya and choose the type of filler the final cost may change dramatically.
technology applying putty
To work need a rubber spatula.After buying the right amount of filler can get to work.Note that every manufacturer of packaged indicates the period during which the deposited material is to be dried.After applying the final layer of the body is polished.You can use the machine for grinding work or carry out the procedure using nazhdachki.Eventually the processed surface should be smooth.If this effect is not achieved, repeat the grinding operation.In exceptional cases, when the putty is applied a layer of uneven, it is best to re-produce the grinding operation.In this case, you will protect yourself from the rough overlay paint on a car body.
answer to the question of how to paint a car with his hands, having your essential elements, is simple enough.With proper and responsible approach, the end result will be no different from the work of professional painters.In addition, it is saved money that can be spent on other elements of the painting cars, such as wheels.
Priming job
last stage of preparatory work - primed body.Some deliberately skip this step (for example, in order to save).However, the main advantage of the primer is an additional protection of the body from the water.Most primers made based on acrylic.This material is moisture, which increases the life of the paint.
question arises: how much it costs to paint the car during the priming work?Each element of car will leave different amounts of primer.Thus, the cost of processing the hood will be approximately 450 ml, for the bumper 250 on the other elements - the order of 150 ml.Based on these averages, it is possible to calculate the average price of a primer of the body.In any case, the result - complete protection against moisture and rust - will have a beneficial impact on the strengthening of the paint on the treated surface.
methods priming
primer is applied by means of a compressor.It will take 2 layers.The first layer - a show.Added to the primer enamel and the solvent.All of this is applied to the body in order to detect irregularities in the application of fillings.These pores should immediately remove the sandpaper.The second layer - the main.Made to protect body against corrosion and moisture.At this preliminary stage is completed.It is necessary to leave the car at night in a dry place for the "setting" primer.The next day you can start to paint.
Auto Painting spray
most economical and effective option - to paint a car with the help of the balloon.In what color to paint the car, the owner of the car decides for himself.Who automotive markets an extensive range of colors and various shades.The main advantages of this method is the ease of applying the paint on the surface of cars paintwork.Thus it is possible to achieve uniformity of the coating even in remote locations (for example, in the wheel arches or in the bottom of cars).
painting begins with a degreasing work surface.This is done by applying a solvent for all parts of the treated metal.Then you can apply paint.It is better to experiment on waste materials.It is important to understand how the paint falls on the surface, from what distance it is best to spray.The vast majority of spray cans allows the LPC from a distance of 30 cm.
Before applying spray should be thoroughly shaken.The first layer is applied quickly enough.It is important to ensure that the body does not remain on the missing elements.One layer is not enough.You should wait about 30 minutes During this time, the paint dries.After the second layer is applied.If there are defects and irregularities, and the third layer is required.Then use a can of varnish applied coating layer 2.It is important to ensure that no stains, or give the impression that the body is painted unevenly.In general, answering the question of how to paint spray machine, it is important to consider that the LCP should be applied smoothly.You also need to give the body time to dry before applying the next layer.
Making cars matte shade
More and more vehicles painted in matte.Now there is a huge number of colors.The most popular are black, brown and white.You can apply a matte color on some parts of the body.In this case, there is nothing left, how to paint car spray the desired color.
haze can be given using the appropriate varnish.The procedure is carried out in several stages: the varnish is applied to the surface of an old car to hide the glossy shine of old paintwork.Then, using the balloon with the desired matt paint spraying is carried out on the body surface.This procedure does not differ from the usual repainting cars.
most expensive and spectacular form of painting is considered to be the addition of a velvet sheen.This gives the car a "roughness" that is felt when touching the body.Thus, the car paint in matte color can be in any way possible.You can perform this procedure on their own.Or - if finances allow - with the help of professional painters.
features body color liquid rubber
liquid rubber is different in that it is applied to the surface of the body relatively easily and as quickly dries up.This is due to the composition of the paint.It is based on polymer-bitumen substance which when exposed to the external environment instantly solidifies and forms a thick protective film.This nuance should be considered when determining the place where will be painted.In general, car paint liquid rubber can be independently withstand all temperature regimes, and with the help of professional painters.The latter option, however, will affect the purse motorist.We have not considered it.
advantage of this method is also a color that can be applied by aerosol method or ordinary brush.When spraying is obtained smooth and dense layer, which is difficult to achieve when using painting tools.Given that the composition has a dense base, it should be diluted.In most cases, a conventional solvent is not suitable.The best option - proprietary solvent recommended by the manufacturer of rubber paint (this information is on the label).Apply rubber paint in 3 layers.The break between them should be at least 10 minutes.At the end you must leave your car in a warm place for a day.Once you can start polishing rinse aid.Thus, answering the question of how to paint a car with his hands, it is important to remember that it will take long and laborious work.Only in this case it is possible to achieve the best result.
Tips for painting cars
For best results, it is best to paint each element of the cars individually.If this is not possible, care must be taken that the paint does not hit the open spaces that can not be painted.This applies to plastic, wipers, wheels.In all cases, the visible parts of the body are closed film or tape.So to paint the car tires need to buy covers for the wheels.Only so caustic liquid does not get on the bus.
Before work is important to calculate the right amount of supplies.This applies to both cans of paint and solvents and fillers.In critical situations, when a car has significant damage to the body, need additional tools: a hammer (for straightening), welding, sandpaper, tape.The whole question of how to paint a car with his hands, important for those who do not want to pay for dust-free and simple operation specialized centers for painting cars.
Conclusion The answer to the question of how to paint a car with his hands, is quite simple - you need to be patient and consistently perform all the steps discussed in the article.In this case, not only can avoid common mistakes, but also save considerable funds that would have gone to the elimination of defects arising during operation.Another important question.What is the cost to paint a car if you only use the means at hand?The final cost will depend on the selected consumables and equipment wear.Thus, when painting balonchikom be aware that consumption will be about 200 ml on average each element car.The average price of such dyes varies from 150 to 300 rubles (in different regions it differs).The volume of one balonchika - 200 ml.In general, auto body painting will take about 2 liters of paint.This is the average price, and it depends on the technology and the thickness of the layers.Thus, the cost of buying cartridges will be 3000 rubles.In view of the solvent and curing the price increase to 5500-7500 rubles.Thus, this figure is 10 times smaller than if you had used the services of professional painters.
