question of how to install wi-fi does not arise for companies and banks.For such purposes, it is a contract with specialized companies that solve this problem quickly and professionally.But when building a small home computer network, it is more than relevant.Services specialist this profile - is not cheap.Therefore, there is a desire to make this operation on their own and thereby save money.Moreover, there is nothing complicated here, and make it possible even for the novice user.
To install
algorithm how to install wi-fi, the following:
- are connecting the router and other network components that are interconnected by wires.
- Configuring router.
- Creating a wireless network connections.
Connect router
first step in how to install wi-fi - is the establishment of physical connections.A key link in the whole local area network - a router.With his switch should begin the implementation of this operation.With its back side typically has five ports for connecting a twisted pair and one circular socket for the power supply.Four ports are painted yellow, and one - in blue.The last set input wire from the provider.By the yellow jacks to connect all the devices to be connected using twisted pair.The second end of the wires must be installed in the device (TV, receiver and system units, for example).Pre-need to prepare all cable products.Next, connect the power supply to the router, and then install it in the socket.
Configure router
The next important step is how to install wi-fi - is the right settings in the router.To do this, first connect it to a PC or laptop using a twisted pair.And you need to connect only during setup.Then, if necessary, it can be removed.Turn on the router by pressing the power on the back side.Then we perform the same procedure with the system unit or laptop.After the download of each proceed to the next step.Run any installed browser on your PC.In the address bar enter 192.168.1.1 and press ENTER.Next should be asked where you want to enter a username and password.This information can be specified on the housing of the router or in the instruction manual.Then you need to install the router settings in the wireless network - its name, and password for the encryption method.The first two parameters can be selected at its discretion.But the last of them must be set to «WPA2» (it will provide a maximum degree of protection of the network).Then the router is restarted, after which it is ready for operation.
PC Connection
At the final step is to install wi-fi on your computer.The most difficult to do on a stationary system unit.It is necessary to connect to it via USB external adapter.Next, install the driver on a CD that comes in the kit.In some cases, you may need to restart your PC.The next step will launch adapter.It will be a list of available connections.It is necessary to choose the one that was found in the previous step.A window appears in which you need to enter your password.Then wait until the receipt of the network address - and you can start to browse the web page.On laptops, this operation is much easier.The adapter drivers are integrated in and configured.Therefore, in this case, it all starts with the scanning of available connections.Further, all similar to setting up a stationary system unit.
Conclusion This article describes step by step procedure on how to install a home wi-fi and configure it.Something is not daunting in the operation, and her forces to carry out even the novice user.Therefore, we take and safely do.
