If you are thinking on the question of how to plaster ceilings made of drywall, you probably want to get high quality results.This process does not require any special skills, but still has to be made on a particular technology.
Preparations
Although the drywall is smooth, its base is in need of some training.At this stage, it is important to analyze how well the set screws.This process involves checking that before the end there is screwed fasteners.Sometimes it happens that the master only prihvatyvaet leaf, forgetting to set screw firmly into place.As a result, after plastering drywall sheets shrink and peel off a little from the ground.The composition applied to the drywall, eventually begins to change the initial linear dimensions and covered with cracks.
Before plaster ceilings, clean all the joints of dust, cover them with a primer and putty, as which usually uses a special adhesive compound.In addition, the joints should be further strengthened, for which it is recommended to use a reinforcing mesh.This will eliminate the possibility of occurrence of cracks on the surface.After application of all compositions, each layer requiring time to dry, it is necessary to produce the seams, which involves the use of the trowel grid based on tungsten.Replace it with a spatula can.Both of these tools should allow to get rid of excess amounts previously deposited compounds with plane seams.At the final stage of preparation of the surface of the salt goose should be well primed.Now we can assume that the preparatory work for the base completed.
choice of method of work
Before plaster ceilings made of GCR, select the technology of work.Some artists applied the finish mixture, which is implemented in a dry form in bags.You can buy and ready compound that before the application will not need to mix, because it is offered for sale in buckets.At the same time you have to use the acrylic material.The second option requires initial application starting mixture.And only after it is completely dry - finish.If you still have not decided how to plaster ceilings, it is necessary to take into account the advantage of the first described embodiment, this procedure makes it possible to complete the work in a much shorter time.However, there is also a disadvantage, which is that nearly any unacceptable finish mixture applied layer whose thickness exceeds 3 mm.When the ceiling, which does not differ a perfectly flat surface, to conceal the error does not, in the end it will not look like that would be desirable.If you do not want to lose time and energy, it is necessary to analyze the original flatness of the ceiling and then to choose the technology of work.
Technology features plastering
Before plastering the ceiling, it is worth considering that the second option, no doubt, take more than an impressive amount of time, but the processing quality will be canceled.This is due to the fact that a significant fraction of the starting mixture will allow the plane to hide all the error.And only then, when the ceiling will have perfect flatness on the surface can be applied to the finish mixture.
The need for alignment
Before plastering the ceiling, many domestic masters think about the question of how, and whether it is necessary to produce such work.It must be remembered that the base with irregularities will look bad in any light.Will appear the shadow areas, and relief will be clearly visible.In addition, a layer of drywall rvstvora surface protection from the negative effects of high humidity or temperature changes.Such phenomena, is to recognize characteristic of the premises for any purpose.If you still can not resolve the question of whether you want to plaster a ceiling, it is worth considering that after such repairs, he will look attractive for a long period of time, until you again decide to update it.
Tools and materials
Do not forget about the additional equipment that is required at work, because if you do not prepare thoroughly, work will proceed slowly and will be accompanied by a large effort.Thus, the first, the existence of which must be taken care of - it's a stepladder.Professionals advise to use compact forest.The recommendation is due to the fact that the mixture and then have to type in the instrument because a container of the composition is unlikely to get fit on a stepladder.
From small tools and supplies will be needed to prepare the roomy bucket made of plastic, or a special container.Need and spatulas, the width of one of which is 10, the other - 30 cm. In order to more quickly stir the mixture require a drill that has a special nozzle in a mixer.For security reasons, it is recommended to use goggles and a dust mask and gloves.
Additional equipment
deciding the question of whether or plaster ceiling tension option to choose, it is worth considering that the first will cost much cheaper, and its implementation will have to prepare:
- primer;
- putty;
- reinforcing mesh;
- broad brush;
- tungsten grid for grout work.
Preparation starting mixture
If you are interested in the question of how to plaster a ceiling, you should be aware of how to make the application of the starting lineup.Initially, it should be diluted.To this container should be filled with third liquid which will pour plaster.Further, the course is a drill that has a nozzle-mixer.Using this tool will allow stir well structure.If necessary, the mixture must be added to the water, it will at the thick part to make it more liquid and ductile.In order to check whether the composition is ready, it must dial the trowel with a tool it should not drain, but rather, it is well maintained on the steel surface.
If before you there was a question about how to plaster a ceiling, you should know that after the preparation of the composition should have a good brew, it is left to do after mixing for 5-10 minutes, after which the mass must be thoroughly mixed again.In this approach, small particles can absorb moisture and become ductility.
plastering
Gaining composition tool, it is necessary to base the movement that is human, on a piece of buttered bread.When applying the plasters to the base of the ceiling should not try to rid the surface of all divorces, since such skills is subject only to professionals.Do not think that the error will remain on the surface, on which it will be possible to get rid of after the ceiling to dry.You can do this is through a trowel grid.
important to remember that initially recommended to fix obvious error, whereas after the master must start processing the rest of the ceiling area.Once treated the entire surface of the ceiling, it can be assumed that with this stage of the work you consulted, you can leave the base until completely dry.
Final work
If you think through the question of how to plaster ceiling with his hands, then you should definitely know what work should be carried out after the first alignment layer.The move comes a spatula, the edge of the working surface of the tool is necessary to rid the surface of fairly impressive number of divorces and excess stock.If you notice less significant defects, but they just are, they can be treated using the trowel grid.In the presence of impressive valleys after the work described the problem areas should be covered with primer.Once these areas are again processed starting with plaster and sanded again, but of course, after the process is completely dry.Once the base is completely dry, you can re-generate rubbing work and priming.
Application plaster finish
If you choose the application of only a single layer of plaster, then before you raise the question of how to plaster ceiling with his hands, using a finishing composition.His, as described above, can be deposited on the first layer of plaster.This should be done after the soil dries.Starting from this stage should finish kneading the mixture, it is necessary to use at the same proportion as in the case with the starting compound.After the final layer is applied and dried, it will also overwrite, eliminate all errors, if they occur, only then should be treated with a surface primer.
Before plastering plasterboard, it is necessary to consider what finishing decorative coating will be used, as it is to be applied after the soil dries.This may be, for example, paint or wallpaper.Treated ceiling above manner will have excellent grip, it indicates that on the basis thereof will keep well the materials.In order to obtain the expected result should be allowed between the application of each subsequent layer.
Recommendations for work
Before plastering the ceiling for painting, you need to complete all the work, which could cause vibration surfaces.Otherwise, follow the procedure will be in vain.If the work is supposed to be carried out in premises which are characterized by increased humidity, you should choose a water-resistant gypsum board characteristics.In the operation of such a ceiling can be vacuumed and subjected to wet cleaning, surface damage such impacts will not do.
If you are thinking on the question of what to plaster ceiling in the bathroom, it is necessary to choose the composition, made in plaster and cement-based.By following all the rules of the work, you get a great result.
