from time to time in the measured life of the computer user can invade the problems associated with the use of the system.It is a nasty bug "memory can not be read».How to fix it?This is stated in the article gives some tips on what to do, without resorting to drastic methods, such as reinstalling the entire operating system.
'll talk about this in more detail.So, in the first place should at least be thought about the causes of this phenomenon.On the old computer and a decent offline The bug has been known for a long time.Let's look at the error "memory could not be read", how to fix this problem on the example of Windows XP, as it was on it for 90% of the error, and appears.
the first to suffer from it, those who are addicted to the use of illegal "assembly."So if you have installed unlicensed operating systems, better reinstall the system, a warning message "memory can not be read».
How to rectify the situation, if the computer you have the legal OS?In such a case would have to work a little.In some cases, the root of the problem could be some problem that arose with the system library ole32.dll.Some careless installation program during the installation process can damage or even delete those registry keys that refer to it.You can only help her complete reinstallation.
To do this, click on the "Start" button, find the field where to enter the commands 'Run', then copy and paste the line «regsvr32% SystemRoot% \ system32 \ ole32.dll» (quotation marks are not needed).After entering the system is rebooted.Newly appeared tiresome words "memory can not be read»?How now to fix it?
There are rough, but in some cases a way to help.You can turn off all the error messages in the system, which include a memory error, and "read".Again push-suffering "Start" button, click it looking for the "Control Panel", open the section "System."After moving into it looking for the item "Advanced", which should be replaced "Error Reporting."We see an item with an empty checkbox next to "Disable error reporting".Put a check mark, left on an important option "But notify critical mistakes."Send to reboot the computer.
Typically, the error "memory could not be read» then disappears.Keep in mind that in this case, your system is in the rest should be in perfect condition, because otherwise nothing good will come!If the program does not start even after that, we will have to think about testing memory modules.You can use programs such as "Everest" or a similar diagnostic utility.
Having identified in the course of several runs of errors in some kind of memory card can be a high degree of certainty say that the culprit is found the message "memory can not be read»!How to fix?Just replace the defective component, but it is better to change the entire memory.Of course, it is better to be sure that it is still not in the system itself and its dubious origin.
Well, we hope, through our advice, you will understand this tiresome mistake!
