When constructing or renovating a bathroom can often be necessary to perform a technological hole in a tile.It may be necessary for the construction of communications, or for laying of tiles in particularly difficult areas.Let us examine how to drill a hole in ceramic tile.
main difficulty in drilling this kind of material is that its surface is covered with a durable and rather slippery layer of glaze.An ordinary drill bit (even from high-quality steel) very quickly blunt about it.
Most often need to drill holes are not too large diameter.For this perfect special drill for tile.
By the way, in order to facilitate their work in the right place it is best to glue a small piece of adhesive tape or adhesive plaster.Also, before you drill a hole in the ceramic tile on the place you want to attach a large piece of masking tape.
In any case, the drill will not be deflected to the side and will not slip, leaving an expensive type of tile unpleasant scratches.
But if you think before you drill a hole in ceramic tile, you need to buy a special drill (which may not be in your store), you're wrong.For this purpose, great conventional carbide drill bits for concrete.
Rather, there is in every home worker.
Lock tool on the right spot is also using conventional tape.The peculiarity of this method is that the drilling to be performed at the lowest possible speed drills.
Unfortunately, none of the above methods fail to make the opening of large diameter, the edges of which would be perfectly smooth.
If you need to make a hole will have to buy the drill bits with a quality-diamond coating.With them, you can cut a hole in ceramic tile, even very large.
Note that to use them you need to have is a powerful tool, as a massive rotation of the crown in the interior is not very soft material - the operation is not available to every amateur drills.Cheap Chinese model during such drilling can simply burn.
It is important to pay attention to the quality of the cutting tool: the smaller the diamond coating, the easier it is to drill holes in tiles.And they themselves are obtained much more accurate.Unfortunately, the quality of a large crown diameter is not less than $ 80, but such expenses are justified.
It is important to pay attention to the quality of the cutting tool: the smaller the diamond coating, the easier it is to drill holes in tiles.And they themselves are obtained much more accurate.Unfortunately, the quality of a large crown diameter is not less than $ 80, but such expenses are justified.
Whichever method you use it, you need to drill as carefully as possible, in any case, take your time and not increasing momentum tool.Otherwise, you risk not only crack the tiles, but simply to burn his instrument.
Now you know how to drill a hole in ceramic tile.
