generation of computers is now replaced with incredible speed: technical solutions, which yesterday predicted a bright future, are today on the sidelines of progress, safely forgotten by all.And some news, the feasibility of which seem to have all of the computer community, after a little period of time become incredibly popular, immediately becoming Must Have (must-have for everyone is indispensable).The former include the memory Rambus, once unsuccessfully promoted by Intel, as well as plug-in card installed on the motherboard and is designed, in fact, for the software and hardware modems.An example of the decisions of the second group can serve as a wireless communication standard Wi-Fi.
now find information about it can be very easy, but how to install WiFi at home, often glossed over.Apparently it is considered that automatic configuration reduces the need for user intervention to a minimum.This is partly true.On the other hand, not knowing how to set up WiFi at home, it may encounter a number of problems.Nuances are always important.Especially if you have to choose a router for the home.
Global Network with problematic access
Everyone understands that lack of Internet sharply limits the ability of a computer in terms of search and delivery of information, so now it is difficult to find someone who would be a home computer not connected to the global network.Especially as more and more providers offer attractive cost proposition.As a result, most of the scheme is implemented, when the cable of the "twisted pair" directly by the house and connects to the computer's Ethernet port.Everything works fine as long as there is no need to provide access to another computer system (two computers in the house - this is not news).How can I do that?
Options There are several ways to access the network from multiple computers:
- car №1 (Internet) connected to the second twisted pair, and on it the same "rassharivat" shared.The disadvantage is that you need two network cards, and when you turn off №1 open pages on №2 not work;
- cable provider is connected to the switch, which also are the "tails» Ethernet interfaces on both machines.However, this solution does not always work, since many providers only allow access from the host computer, checking the network card's MAC address;
- choose the best router for home and organize independent access from multiple devices.
How to install WiFi home
Router - a device that controls data packets.It can communicate with computers through a twisted pair, or radio waves (WiFi).The second allows you to not only give up the wires in the house, but also to ensure access from all mobile devices within a radius of several hundred meters (passport), which is very convenient.
So, how to set up WiFi at home?First of all, make sure that all devices that need to provide access to the network, there is a radio WiFi.In today's laptops and CellPhones present, but for the personal computer will have to buy an expansion card.Then you need to decide if they need shared access to popular solutions IPTV.If so, configure the WAN router must be present items Dual PPPoe and Multicast.When you bind to a provider MAC address settings of the router must be a function of MAC clone.Recommend any firm producer pointless - it's a personal choice of the user.Also pay attention to the standards support IEEE - they must match or be compatible.The type of radio module can be found in the passport to the device or the manufacturer's website.
Connection
So, WiFi router is purchased.Twisted pair from the provider connects to the WAN.On all other machines include radios (need to install the driver and use the device).After that may need to open a configuration window (usually appears self) on each network computer and confirm the use of the detected access point.That's all.If your router is enabled DHCP (most often this is the case), then you can begin to review the resources of the Internet.If you have problems, you need to use the automatic installation disk, included with the router.
