One of the indisputable advantages of any inkjet printer - is its relatively low cost and the ability to print color images.Laser counterparts, allowing data output in color, are much larger.However, as is often the case with inexpensive products, the price of supplies are often comparable to the cost of buying the entire unit as a whole.In this case, this means that after discharging the ink reservoir cartridges, bundled with the printer, the owner is forced to buy a new set.However, there is a solution that allows you to save considerably on such acquisitions.It is enough to figure out how to refill cartridges on your own - and you can save quite a large sum.
Background
This possibility became known for a long time, almost simultaneously with the first inkjet printers.The meaning of this operation is self-priming in the ink cartridge is exhausted the capacity of the liquid, enabling its re-use.The number of gas stations is determined by the capacity and design features of the printer, gently operation and used paints.
print engine jet printer is quite simple: in the head, moved perpendicular to the passing sheet, arranged microscopic nozzle-nozzle out of the tank to which the ink supply.On command from the controller are in some way squeezed colorant droplets fall onto the paper and forming a desired image.Inside the container is a porous material holding ink.Depending on the modification, the print head can be combined with the capacity and also be a separate unit.
Cartridges Canon
Although, in theory, allow all struyniki refill ink porous material, in some cases it can be difficult.For example, manufacturers are struggling with a variety of ways this opportunity, since such interference into the printer deprive them of profits from the sale of filled cartridges.By Epson puts chips, HP is inconvenient, but the easiest way to figure out how to fill the cartridge Canon.In addition, time-tested technology Bubble Jet, when the ink is squeezed thermal expansion ensures long-term operation of the printer.Next we present the procedure for filling the devices of this firm.
How to fill the cartridge Canon
First of all you need to prepare everything.To do this, visit the shop of computer equipment and ... pharmacy.No, for aspirin.The how to fill the cartridge Canon, nothing complicated.It purchased:
- the right colors and ink types.Their number depends on the printer model;
- the same number of syringes with thin needles;
- clean, dry cloth and wool;
- thin plastic gloves to protect your hands from paint.They can take in supermarkets or from kits for painting hair.
After all it is purchased, it is possible to understand on how to fill the cartridge Canon.The table, which will be carried out by pouring the liquid ink, it shelter several layers of newspaper.Then you need to open the cover of the printer is to change cartridges (instructed) - carriage would bring them into the available area.Further recommended reading designation color cartridge and find online matching holes and colors to know how much to pour.Then, follow the instructions, you need to remove one of the cartridges.If it is combined with the print head, you should be careful not to touch the nozzles.Carefully remove the label by typing in the correct color ink syringe, insert the needle halfway into the cartridge and slowly fill it.2-3 ml is usually sufficient.Do not exceed the recommended rate - only hurt too much.Then you need to place a sticker on the back (though sometimes it is discarded) and insert the cartridge into the printer.Operations are repeated for other containers.It will only have to test nozzles, and clean heads in the menu of the printer driver.
