What if your Windows does not see the hard drive?Let's deal with this problem together.A common cause - incorrectly defined the priority setting in the BIOS downloads devices.To help you understand what I mean by this, imagine that you put in plants that first turned to computer sit-rum, and only then to the hard drive.
Then you run or viewed disk with photos Vindovs and forgot to remove it.The next time you turn on your computer it is put to the carrier.Since it does not boot, it is possible that for this reason you have not determined the hard disk.In this case, the CD and try to be pulled again.
If the hard drive you exposed to second in the download queue, and laser disc in Sidi rum or stick into USB-port is no change in the settings BIOS boot priority of devices so that your hard drive, which recorded an operating system,It was the first in the run queue.After that you want to save the settings and reboot the computer.
you all this performed, but the hard drive is not defined as before, while continuing to search for the cause.Go into your BIOS setup and see if it sees your computer there.If not, open the system unit and verify the accuracy and reliability of connections to the motherboard and power supply.If possible, try to connect it to another computer, as well as with another cable.When it comes to devices with the IDE-interface, make sure that the BIOS has been allowed to use such devices.
Next reason why Windows does not see the hard disk, can be covered in an error installing special jumper, which changes the mode of your hard drive with the master to the slave.Make sure of correctness of its position, based on a scheme that is usually painted on the label at the top.
In my practice, I came across a very unusual reason for which Windows does not see the hard drive.After I set for myself the necessary settings in the BIOS, save them, and restarted the computer, they will not come into force and remain at that level at which they were prior to my plants.I repeated the above procedure, but the desired result is not given to me.
After some time finding the reasons for it is still detected.It was found that in the chip CMOS power supply sat.As soon as I replaced it, changes are preserved after the first attempt.So if you can not solve the problem by other means, try to replace the battery.
I think you now have an idea of the reasons why there is that Windows does not see the hard drive.While we have considered not all.But the rest - this is the work of specialists.If you have tried all possible ways, but nowhere came, leave this to a qualified professional in order not to aggravate the situation.These people have the necessary equipment and experience with which they fix your bad luck.If this will not work, even they, most likely, you'll have to buy myself a new hard drive.
