If you are a novice guitarist, it is unlikely you will be able to tune your guitar by ear.To do this, you need to have a lot of experience and ability, so most beginners use more simple methods, for example, such as tuning the guitar through a tuner.However, such devices are professionals and when you need to quickly and quietly set up a musical instrument at the concert.For information on how to tune the guitar using the tuner, read our article today.
Characteristics device
This element is a separate device, or software installed on a laptop or smartphone.In fact, significant differences between the tuner is not - how they work the same and the only difference is only in the process display.To work, you can take the easiest and cheapest tool, which has a display with an arrow, and a scale.With this tuner you tune the guitar as accurately as possible, with minimal effort.
How to tune a guitar tuner on?
first thing to start with the first string, holding it at the 5th fret, which should correspond to note "La".Sometimes beginners make mistakes, starting to tighten the string of a musical instrument, looking at the monitor the tuner.Note, however, that is not always the guitar will be set if the device impact will show the letter "E".The string can then sound in a completely different octave.How to tune your guitar using the tuner correctly, not allowing such errors?It's very simple - when tightening the strings enough to use such a tool, like a tuning fork.Then you can just put the notes of a musical instrument correctly.While tune the guitar using a tuner can do without this device.
few words about the tuning forks
Currently there are several types of these tools - in the form of a whistle or a fork.Experts recommend the use of electronic tuning fork emits a note of "Mi" (the sound of the open first string).You can also use the online tuner that can play sounds of open strings.
should be noted that the tuning fork allows you to compare and publish only one note - "la" first octave.The frequency of the reproduced sound is 440 Hz.The tuner also determines the frequency of oscillation and the notes, and the sound that corresponds to it.
As further tune your guitar through a tuner?Once you have configured the note "La", using the same tuner need to "readjust" the given string.Make sure that when you hit the first open string, the arrow is in the middle of the scale "0".The display appears with the letter "E".
How to set up six-string guitar?Setting the remaining elements
When the first string is configured, it is similar to proceed with the rest (adjusts to it).To do this, on the 5th fret clamped 2nd string.There needs to be done so that it sounded the same note as the first open, t. E. In unison.Further, the tuner is taken and the same rules "donastraivayutsya" other strings.Therefore, when you hit the 2nd not clamped parts arrow display will show the letter "B".
adjust the upper strings (the first two), start the third.It should hold at the 4th fret, pulling up to the sound of music, and that the second open.After this string is fine tuned by the tuner.Unlike all previous cases, here the display device should display the letter «G».
How to tune your guitar using the tuner on?In the next phase IV element is clamped again at the 5th fret.It notes the tension to be adjusted in such a way as you did the previous open string.In the tuner sound public must comply with the letter «D».The following string is also clamped at the fifth fret and adjusts to open the fourth.Display Tuner must show the letter "A".Finally, the last six strings are tuned to the previous so that the symbol is displayed on the scale "E".On this, perhaps, and all.At first, this process may seem complicated, but eventually begins guitarists accustomed to this problem and treat it with inspiration.
What you need to remember on this basis?
The first thing to learn to understand the standard tuning six-string guitar.It includes a few notes:
- «Mi".It belongs to the most subtle, the first string.In the tuner when properly configured, the display should show the letter "E".
- «C».The note refers to the second string.The display device, it is designated as "N".
- «Salt».This note (or third) on the tuner should be exhibited by the value of «G».
- «Re".Everything here is similar - the instrument is exposed under the letter «D».
- «La" - under "A".
- last note of "Mi" (sixth string on the guitar) is adjusted for the tuner under the value of "E".
know how to tune a guitar tuner on, it's not so bad - a real guitar player should know how to fix all the defects arising.Exposing a musical instrument and strings, it is important to remember the errors that can occur at any time beginners.How to prevent this?To avoid errors, unfortunately, can not even professional, so the only way out is to check the accuracy of tuning a stringed musical instrument.Ideally, not clamped first and sixth strings should be played in sync with the third, sandwiched on the 3rd fret.
Alternative methods
There are also other ways.For example, to verify the correct tune your guitar, you can try another option - to hold the first string at the 5th fret and compare it with the sound of the note "La".The sound in this case must be discharged, that is reproduced in unison.If the melodies are very different from each other, try to hold the first string on the 4th or 6th fret and again compare.If the sound is clamped on the fourth fret of the string is similar to the "La" means the element is set too high and it is necessary to weaken.If it happened on the sixth, the need to detail here, on the contrary, to spin.Thus, by varying the tension of strings, you'll get the maximum simultaneous guitar sound on all notes.
also one of the signs of fine-tuning the oscillation is the first string in the second clamping at the 5th fret (the extracted sound).
Knowing these rules, you will know how to tune your guitar using the tuner.
