Toning - the process of applying for car glass special film, which serves as a driver protected from direct sunlight and prying eyes of others.In addition, cars with tinted have a more attractive appearance.Often, this film is made from polyester in different shades.Thus its outer glass layer protects from mechanical damage due to the small content of the metal compound.And if before tinting was affordable only to the wealthy car owners, but now you can buy such a film without any problems.And in order to make it really good looking at the car and efficiently perform its functions, you need to know how to properly toned windows of the car.This will be discussed in today's article.As
toned rear glass "VAZ", or what to consider when buying?
To begin, we note that a few years ago Russia adopted a law on tinting car, which prohibits the use of a film with a low light transmission.Thus, when buying a need to look not only at its color (it can be not only in black), but also in the percentage of haze.According to the standard rate of degree of darkening of the film must be at least 70 percent of daylight.Wherein the rear window and rear side may have any transmittance.
under the special prohibition has got the so-called mirror film.It is for legislation and may not be used at all in cars.If you follow these rules, you will not be difficult to pass MOT and avoid problems with traffic police inspector.
electronic tinting
As a small retreat a few words about this innovation dubbing films.Recently in Russia there are more artists who are engaged in installing it, but few motorists know what it is special.The main difference between the electronic tinting is an instant change of haze.By pressing just one button on the key fob, you can for 2-3 seconds to change the setting from 0 to 100 percent, or vice versa.And it is not a crime, and before the traffic police post has the ability to quickly change the hue and thereby avoid the penalty.However, the cost of such a film is from 2 to 10 thousand dollars, but it can not be installed without any special skills or tools.Therefore, the electronic tinting remains invisible to our motorists luxury.
Choose a color
As for color, it can be quite varied.However, the most popular in recent years, along with the black, silver is considered shade.And it is applied only to the upper half of the window and like the chameleon changes its brightness from different angles sunlight.As
toned rear glass with their hands?Cooking tools
In the course of work, we need: a rubber spatula, knife stationery, detergent or shampoo, clean cloth or rag and spray bottle.In the case when this film is applied to the rear windscreen or necessary to prepare even a hair dryer.Last help eliminate wrinkles and bubbles formed during application.
Surface preparation for the application of the film and the process of stickers
Before toned rear glass, it must be thoroughly cleaned.Keep in mind that the surface must be free of any greasy formations, mud divorces and road dust.Otherwise toning simply not stick to the surface, and the next day will disappear.Also pay attention to scratches.If there are walls of glass chips and other deformations stick film without bubbles here is very difficult.
By the way, if you're going to tone not only back, but also the side window, for best results you need to remove the seals.The very same film is applied only on an inner side of the glass.This will help to avoid frequent mechanical damage which may occur during operation of the vehicle.
After a thorough cleaning of the glass should be diluted soapy water and fill them spray.This tool is used to wet and adhere to the windows of the surface of the thin film.
Since tinting car sold in rolls, cut in front of the label must be the right amount of it.Doing it better not strictly along the contours, and with a small margin of 1-3 centimeters.The excess portion after installation is very easy to clean.As
toned rear glass on?Before the application of the film is moistened in a solution from a spray.Then you can easily apply it on the glass.In the case of air bubbles must be part of the film and peel with a spatula to smooth the surface.Although it is possible to remove the air and after full application of toning.First, the top film is moistened with water, and then around the perimeter runs dry cloth.Then take in hand trowel and finally smoothes the surface.Using scissors carefully cut the excess portion of the film at the edges.The smaller scissors are, the more accurately you perform the work.If you want to learn how toned glass front, you can safely use this instruction.It is universal for all the windows in the car.
for final mounting tinting on the glass surface for a more natural and it kind of it is processed further industrial hairdryer.Thanks to him, the film does not only take the right path and the shape of the window, but quickly dried.By the time toned windows of the car with your hands can be 1.5-2 hours.It all depends on the area of windows and scope of work.
Conclusion The main advantage of self-tinting compared with a professional - it's cheap.Indeed, for the same period of time you get the same result, and in our case also will gain experience with this type of tuning.As you can see, stick the film on the surface of the glass is not so difficult.The main thing - before that it thoroughly rinse and degrease.Well, all the necessary tools and means to do so, you can buy almost any store.
So you've figured out how toned rear glass with their hands correctly.
