How to install Windows on a netbook with a stick

click fraud protection

netbook can be very convenient because of its light weight and small size.However, due to the fact that netbooks are not equipped with a built-in optical drive, perform certain tasks (for example, to reinstall the operating system) can be difficult.If you do not have a spare external drive CD, installation of the new OS can be carried out using a bootable USB drive.

If you decide to check out how to install Windows on a netbook, you'll need a bootable flash drive (2GB or 4GB), you need to prepare by downloading from the Internet ISO-image desired to install the OS.

can then proceed directly to the installation process.Presented below guide will tell you how to install Windows XP on a netbook (Windows 7 may cause some difficulties in connection with the specific settings).

Insert your bootable USB flash drive into one of the USB-port on your netbook.Turn on the computer and press "F9", to open the window for selecting the boot device.This key can be called "Fn" devices on some models.Select your flash media as an initial source of the download.

Do not forget to remove all partitions on your hard disk.Of course, you can simply create a separate partition, but this is not recommended.This can lead to what will appear at boot various system errors.Form a single large partition NTFS (quick creation will save you a lot of time) and follow the instructions that will appear in succession on the screen.These instructions tell you how to install Windows on a netbook.

Several times during the installation, the system will prompt you to restart the computer.If you try to do it, it will re-boot from the hard drive, and you receive an error message.To avoid this, you press the "F9" on reboot and select "1" for setting the graphical interface.Talking about how to install Windows 7 on a netbook, it should be noted that some specific version of the OS, so this method may not be appropriate.

Once you finish installing XP, you may notice that you can not load Windows from your hard drive.If you still have a disc USB, again press the "F9" and select "GUI".After that the operating system should be loaded, and the question of how to install Windows on a netbook will be resolved.

If booting from a hard disk is still not possible, you should carry out editing the file boot.ini:

Type MSCONFIG in the "Run", located in the "Start" menu, and select the tab "BOOT.INI".Try to select "Check All Boot Road".This may solve your problem by finding and removing abnormal load settings.

Edit the boot.ini file by hand can also be necessary in cases where he does not read anything like multi (o) disk (0) rdisk (o) partition.Rather, the problem lies in the fact that you have selected the wrong partition.This can be represented as (0), (2) or something like that.In such a case, you should back up and then edit the file.

Open the "System Properties" using the right-click menu in the "My Computer" and select "" Properties. "In addition, you can type "sysdm.cpl" in the "Run", located in the "Start" menu.Go to the tab "Startup and Recovery" and then click on the button labeled "Edit", to open your boot.ini file in Notepad.A good idea to keep a backup - Select a "Save As" and save the file in a convenient place.

Now you can safely edit the file boot.ini, change the number of partitions or adjust other settings.Save the file, and then you can load the operating system installed after reboot without your stick USB.Thus, to understand how to install Windows on a netbook is not so difficult.