There is nothing magical and exciting than their own hands to create a small miracle, even if once invented and embodied by someone else.After all, you can always add to hack anything from myself or interesting additions on the soul.And in the process of attracting their own offspring looking for your attention and creative skills, made friends and will help to open many new and unknown, than so rich world of crafts, relevant or cute.So, today we learn how to make a ball of thread and glue, consider different options starting materials and different ideas for home decoration, festive table and children's corner.
starts with the selection of consumables
range of modern craft, designed to decorate our lives is enormous.Balls - simple, but very impressive artifacts.
set of materials needed to create a souvenir:
• pneumatic (air) balls of small diameter;
• any fat cream or petroleum jelly;
• skein of yarn you like, which will decorate the ball;
• longest (Stirrup) needle.It is required depending on the choice of adhesive and a method thread wetting them;
• glue - stationery, PVA or specially made.
Before you learn how to make a ball of thread and glue, and before you start the selection of materials for the job, we should define the future size of the crafts, the quality of the thread, which will be the main decorating element, and a method of pasting.
Balloon: the basic requirements
will understand how to make a ball of thread and glue his hands.The basis for the production of souvenir are balloons.When choosing them, should be guided by the following considerations:
• balls should be round, as ovals require more accuracy can not always keep the desired shape is not so spectacular and versatile as the proper sphere;
• balls better not take a very large diameter of 8-12 cm is the best option, especially if it is the first hack.
And more importantly, that the ball was stronger, t. E. The cheapest option can fail at the crucial moment, not just blown away and spoiling the future of the product.Worth buying balloons with the reserve and check them carefully before starting work.
Choose glue
Successful implementation artifacts it depends on the composition of the adhesive.You can use the office silicate glue in a plastic bottle.Here in this case, and we need a thick needle.She pierced the bubble wall and pulled the thread through the adhesive, thereby wetting it, avoiding excessive soaking (barrier serves as a second wall of the bottle).This is a good and economical way, but the use of PVA glue often welcomed by our skilled craftsmen.This versatile adhesive more flexible, softer, and it seems that hack, treated them more pleasant to the touch and even warmer.Although each method its adherents.PVA glue heavy, so it is diluted with water in a ratio of 1: 1, mixed well and poured into a flat dish.Then the solution was passed through a glue thread.There is a special recipe of glue, the most suitable to carry out these works: an aqueous solution of PVA added sugar.This mixture gives the crafts made the necessary rigidity and strength.The proportions of the adhesive are as follows: 30 g water, 15 g of glue, 4-5 teaspoons of sugar.
How to make a ball of thread and glue stick?It is also possible, but there will be need help the kid, since stretching of the thread protruding from the case glue sticks should be well pressed her to have time to soak in, and to do this we need another pair of hands.
main element of decoration - the thread
thread is chosen, depending on what you want to see the output.You can use a thick wool or acrylic yarn.There are many excellent decorative yarn: with knots, sequins, rolls and a variety of other interesting elements.The thickness of the yarn that is selected on the basis of functional load, which will be borne by future hack.Large-diameter balls decorating the room impressive squares, made of thick yarn, jute or light cord, will look great.A graceful tree toys, balls must be made of fine cotton, linen or synthetic fibers.In other words, the question is not only how to make a ball of yarn with their hands, but that it will adorn a souvenir.When the question of the place where the artifact will be settled, begin to implement ideas.
Workplace Preparation
surface on which the process will be the appearance of balloon craft, must be protected from aggressive raw materials.It is especially difficult to scrub off the countertop silicate glue.Rescued a piece of oilcloth or garden films.They dim the working surface.Before you make a ball of thread and glue, to protect their own clothes and hands.It is very useful to the apron and gloves made of silicone rubber or thin.
How to make a ball of yarn with their hands
So go ahead.In a narrow container pour part of the preparation of glue (we are talking about how to make a ball of thread and glue PVA) .Motok selected strands laid side by side.Inflate round ball to the required size and tied it tightly, leaving a sufficiently long end of the thread as a fixture, which is useful when drying the finished souvenir.The inflated balloon grease cooked cream, Vaseline or any oil.This is done so that the ball is not stuck to the filaments.If this happens, pull and remove the remnants of the ball from the resulting sphere is impossible without deformation crafts.Omitting the thread in a container with glue and wetting her start winding a ball.Overlay turns slightly pulling thread can be in any order, or randomly, depending on the planned embodiment.
have already mentioned how to make a ball of thread and glue for stationery.It requires thick needle, through which the thread can be pulled through the bottle with adhesive and wound in the same way as when using PVA adhesive.
Features drying
After the ball is wrapped, it must be completely dry.Here you will need and the long end of the thread.When drying the ball should not come into contact with any surfaces, so the best option would be to bind it to a horizontal stick attached to the place where artifacts are dry, without disturbing anyone.For complete drying is necessary for a long time - 1-2 days.But to accelerate this process is not necessary.Heating devices located near a hanging crafts, they are able to deform.If you overdo it with heating, the ball-source may break and nullify all the efforts.So do not take unnecessary effort.Allow the balls to dry naturally.
last stage
After a good drying yarn twisting ball, perfectly harden and will hold the shape.Now you need to gently remove the original rubber ball that serves as a kind of frame.It can simply be punctured with a needle and when it deflates, pull from the sphere formed by the hook.That's all.Crafts ready.Today we learned how to make a ball of yarn and glue.It can be used in a form that has turned out, and can be decorated with sequins, crystals, artificial flowers, etc.Magnificent Christmas decorations are balloons, covered with acrylic spray paint.Especially effective all shades of bronze, gold and silver tones.These balls are often the basis for the elegant decorative compositions, and are also used as single accents in the decoration of the space surrounding us.
