Work at height must be performed with extreme caution, because this work is extremely dangerous.Therefore, protection of labor includes a number of rules that should be followed in the workflow.
strictly adhere to the precautions required to ensure the security of the person, so you should never neglect those requirements, which are set out in the statute of the enterprise.
First of all work at height regulations require climbers to undergo mandatory medical examination.As a rule, to the professions that work on the ground at a height of 1 to 5 meters, include: electrician, electrician, welder, etc.A medical examination should be held by representatives of the professions in the compulsory once a year.There are a number of medical contraindications that may be an obstacle to the implementation of human steeplejack work.Moreover, work at a height must be carried out by persons not older than 60 and not less than 18 years, which in this case is not required to have a qualification below the 3rd level and receive the necessary training.The main tool that saves from falling from height at work, there is a safety belt.
It is important that all employees are instructed in the workplace, which includes a detailed explanation of the features of the operation of safety devices, training, compliance with the rules of the workplace in the desired state and existing approaches to it.
All work at height must always be carried out by people wearing helmets, without complying with the conditions of the employees are not allowed to perform their professional duties.
Any action with a pyrotechnic, pneumatic tools, and electrified is not allowed to make a portable ladders or stepladders.For such purposes should be used ladders to the upper landing, which have railing, cradles, scaffolding, hoists, tower.
If an employee is unable to secure the straps of his safety belt for the design, use rope or safety steeplejack safety device.If
under construction, which made the actions are live parts under voltage, the instrument should be a mandatory tie.
In certain situations where the workplace, as well as approaches to it pass through the live parts without guards, they must be disabled.
not allowed to perform work under the wires, which are under stress (high voltage power lines).
Installation work should be carried out at the height of a specially established and fixed structures.Suspended ladders, platforms and other devices must be secured to the mounted designs before they are lifted to the proper height in the design position.
installers transition between structures must be carried out using special bridges and ladders and stairs that have a fence in places where it is impossible to use a lifeline and safety belt.
Any mounting of large, precast-monolithic and multi-storey structures must be carried out on a predetermined project.He must necessarily reflect the specific structures mounted with an indication of the technical means of their secure installation.Also, the documentation indicates the precise location and positioning of the valve, which is contained in the elements of design, and the maximum permissible load, that can be provided on it as a whole.
manual labor protection for workers who perform a series of actions at the height requires strict adherence to all the rules prescribed in it.The same is required from the leaders and who are responsible for the actions of their subordinates.
Remember that compliance with all the rules, which are set out in safety, allow, first of all, maintain and protect your life.
