Probably every computer user has repeatedly faced with the problem of reinstalling software and operating system.Despite the fact that the development of technology gave us devices such as laptops, netbooks and tablets - reinstalling Windows still remains relevant and acquires new features.
features of modern computers
Devices new models simply lacks any drive, and the user is faced with a difficult task: it requires not only the recording software Windows on a USB flash drive, but also knowledge of how to do it.Today the method of installing the operating system from a flash drive has become increasingly popular.It is enough to find a sufficiently capacious flash drive (for Windows XP will need about 2.5 GB of disk space, and for Windows 7 - about 7 GB), capture the Windows image on a USB flash drive with the help of special software to make it bootable, and follow the installation instructions.
How to get the operating system Windows?
Before you begin to understand the issue of how to write "Windu" on the USB flash drive, every user must first choose the desired drive size and the appropriate operating system release.
Windows, you can become the owner of several ways:
- Buy software CD in one of the points of sale or in-store computer equipment, which has permission to supply the operating system Windows.All of them are required to be marked, and their owners given a special sticker with a serial number that needs to be put on the computer system unit or back any device: laptop, netbook or tablet.
- Download the software from one of the many torrents on the Internet.However, this method is illegal, and the owner of the computer that is running a pirated copy of Windows, can be prosecuted at the first check his computer.
How to burn "Windu" on the stick?Methods
Once you've got your own copy of the operating system of Windows, you need a reliable way to preserve its image and write it to the flash drive.In addition, this flash is required to make a bootable.Otherwise, all manipulations can be regarded as meaningless, because you need to install the operating system, rather than simply transfer files from your PC to other media.
Popular software to create a bootable USB drive
to create a full bootable USB drive that will be seen during a reboot of the operating system of your computer, and install it with Windows, you must use one of the following programs:
- DirectGRUB.
- GRUB4DOS.
- UltraISO.
With their help, you can record the image of "Wind" on the USB flash drive and properly prepare it for installation.Dealing with each of these programs has some nuances, which we describe below.However, each of them allows you to create a full boot device easily fits in your pocket and is able to install a new operating system in minutes.
DirectGrub: Alternative Entry Windows
How to burn "Windu" on the USB flash drive through the program DirectGRUB?This process is quite simple and does not require specialized knowledge and skills in information technology.To cope with this task can perfectly anyone.To do this, he needs to just follow the following instructions:
- Download DirectGrub.
- Download or create a disk image of an existing Windows.
- Burn "Windu" on the USB flash drive.To do this, select the image in the program and press "start" to start the process.The program will automatically create a bootable USB flash drive, and put it all needed to install the operating system data.
- To begin installation, you must enter the boot menu, and select the priority of the computer to boot from a flash drive.
- After starting the download you will see a special Grub-menu, where you will choose the first line and begin the installation.
- Important!After the text-mode installation of the operating system will end and the computer will require a restart should again boot from a flash drive and choose the same item.After that, it is not necessary to press any keys while the computer will not boot.
Writing with GRUB4DOS
For this method, we need some software products, namely: HPUSBFW, with which it will be formatted, and loader GRUB4DOS, which will help in the installation of the operating system.How to write "Windu" on the USB flash drive, if all the necessary applications are already installed?Once you have found the necessary software, you need to follow the following instructions:
- Format the flash drive in the desired format: FAT32 for WinXP and NTSF for subsequent versions.
- Run GRUB4DOS, choose it as a device our flash drive and click "Remove."The program will create a partition C: / Program Files / WINGRUB /, established in it and create a shortcut on the desktop.In addition, it will be added to all boot files on our stick.After this happens startup programs.
- In line running GRUB4DOS find Disk, and choose our drive for the purpose of installation.You should carefully choose the drive, guided by its size, as the program for some reason did not write drive letter.
- opens a console window in which to press Enter, and then will only have to properly configure the boot loader.
- to correctly configure a little bit, we deceive our computer, making him believe that our drive is a floppy disk.The boot floppy can usually be found in the same location as the image of Windows.
- Then just copy all the images on our flash drive, restart your computer and install any version of Windows.
software UltraISO
How to burn "Mace" to stick with this program?UltraISO is an excellent application with which you can burn the image to the USB-drive and make it bootable.Despite the fact that this program is paid, it will be enough free capacity for our needs.To create a bootable USB drive and install it from the operating system will need to perform the following steps:
- first open a previously created image of the program UltraISO.
- Select the menu item "Bootstrapping" and there item "Burn Image."
- in this subparagraph need to carefully check all recording parameters, namely: the image of the stick.
- choose the method of recording the image of USB-HDD, but did not put a check Create Boot Partition.
- Click the button "Record".
Now you just need to wait until the process is finished the data transfer, and placing them on the flash drive.You can then restart the computer, choose the boot menu to boot from the USB drive and install the latest version of the operating system.
Advantages and disadvantages of the installation of Windows with USB
Now we know how to write Windows on a USB flash drive and can consider all the pros install the operating system in a similar way:
- very quick installation process.All modern flash drives have the highest rates of reading and writing data, thereby reducing the whole process several times.
- High reliability.Unlike traditional CDs, which can be very simply mechanically damaged flash drive is not afraid of scratches and abrasions.In addition, it can not simply broke inside the drive.
- Very convenient.USB flash drive is small and has a rectangular shape, it is easy to hide in your pocket, unlike the bulky CD.
- compatibility.Unfortunately, very old computers method of installing the operating system from a USB drive does not work, but they are often equipped with an optical drive.However, netbooks such a device can be omitted, and the flash drive will not only help with the installation of the software, but also save money on the purchase of the drive.
