Today Russia is very popular element of the decor such as window blinds.Now you can find many companies that are engaged in their production - it can be as plastic and metal products, at least on the plastic windows are installed fabric options.In this article you will learn how to hang the blinds for plastic windows.The principle of the installation is almost the same, there is only a slight difference in the arrangement of the slats.There are venetian blinds on plastic windows, as well as vertical.
Why do the work yourself?
At this point of the stores offer free installation of blinds (especially for office space, which is often placed windows and blinds one set).But this is not always - sometimes you have to pay extra for their installation.In the markets and at all of such a service does not exist.Therefore, the fastest and most economical option will self-install.To do this, you do not need any expensive tools enough to have a pencil, a screwdriver and a screwdriver.
How to Hang a plastic window blinds?The first phase of
So, after acquiring the goods you need to prepare the surface, and which will be installed blinds.There are several options for installation - installation lap or on the window frame.In any case, all work steps are the same.After careful preparation Check the dimensions of the goods to the dimensions of the window.A small amount of deviation of 1-2 cm, but no more, otherwise your window will look ridiculous.If the sizes do not match, it is better to another exchange structure.But it is not necessary to open the package soldered with blinds, or you just do not exchange goods.
How to Hang a plastic window blinds?The second stage
If the dimensions are the same, you can safely start the installation.To do this, you will need to hang up the design on the window sash.Attach the upper part of the blinds to the transparent window of the product, and then reseal it with the help of two special elements in retaining glazed casement window (they are called shtapikami).Next you need to take a special U-shaped pads (they are often sold with goods).In order to achieve the desired thickness of the gap is required to seal a gasket between them.It is recommended to leave at 2 cm from each side.
How to Hang a plastic window blinds?The third stage
Once you're done, you can proceed to the final step - fixing shutters.To do this, you will need screws (they are usually included), screwdriver or a screwdriver.Remember that the mounting is done primarily on the plastic surface, so tighten the screws should be very careful.Everything, at this stage of the installation is complete.
So, we figured out how to hang a plastic window blinds on all the rules, and make sure that the installation design is no big deal.By the time the whole process will take you no more than one hour.
