How is the microphone?

Check microphone in Windows 7 is carried out in several stages.First, we should make sure that everything is connected properly.If a system unit with a standard motherboard, the jacks for headphones and microphone must be located on the rear panel: Green connector for headphones, pink - for the microphone.

program to check the microphone is already integrated into the operating system.To call it, it is necessary through the control panel menu to go to the Hardware tab, and sound.Before you configure a device, make sure that you have installed the special driver "Manager Realtek HD».

tab "Sound", switch to the "Record".Two clicks is called a menu where you can adjust the levels.Slider is recommended to put on record the maximum, and microphone gain to minimize.Otherwise, the recording will be a third-party noise.Power may need when setting up Skype and similar applications to communicate on the network.

Check microphone will yield positive results if properly installed and adjusted sound drivers.Install better native tool, one that came with your computer.

If the debugging sliders results were zero, then the most likely drivers are missing.To install from a disk called the installer.After the appearance of the Welcome screen, select the call tab setup file and run the wizard.Check the microphone and his stable job does not require installation of all the tools offered enough select Realtek HD Audio Driver, while a checkmark in other programs can be removed, so as not to clutter up the space on your hard disk.


After the process, you must restart the operating system to the new files become part of the structure of the system documents.After starting the computer will appear in the system tray icon blue Manager Audio.If you double-click on it to open the configuration window manager.In it is enough to go to a tab, a microphone and set the desired parameters.

recommended sliders recording volume and playback volume to maximum output.Then check the microphone will yield positive results, with the analog signal must debug its intensity.To do this, bring up the options of connectors and install the necessary checkboxes.After you click OK, the settings are locked and take silu.Esli debugging performed correctly, then you can safely use the microphone for communication in the network, or sing karaoke.

Unfortunately, most people make mistakes, suggesting that additional effects can improve sound quality.Computer - this is not a professional studio, it is difficult to achieve a perfect sound without any additional hardware, but the modern programs can improve the sound at times, apply special effects and make your PC work for professionals.

Technologies are evolving, and the developers of modern software offer unique solutions that allow you to replace expensive equipment.Of course, such software is not free, but much cheaper and is designed for use in the professional field.