Almost everyone sooner or later confronted with the repair of the apartment.At the same time, decided to start working, you must decide with a lot of questions.And here it is important to know the sequence of repair apartments, all its main stages, which will help you plan the entire process.
Before you start planning, you must determine the type of repair: cosmetics and capital it is.Between themselves, they differ significantly.In the first case only the replacement of decorative coatings with a complex of works on preparation of the surface.In the second case there is more global changes, including the redevelopment of apartments.
In general, the repair of an apartment next sequence:
- dismantling;
- the installation of windows and doors;
- partitioning;
- electrical work;
- the replacement of the heating system;
- plastering work;
- preparing the surface for finishing;
- facing work, installation of decorative coating.
Depending on what will be replaced, some stages are excluded.Stages of repair apartments in the building can also vary depending on whether it rough finish or "turnkey".
further includes ancillary works such as the rearrangement or removal from the premises of furniture, removal of construction debris, etc.
necessary to solve other problems: who will do the work, you need a repair project apartments, create a cost estimate and purchase all necessary materials and tools, etc.Next
already should begin immediately to work themselves.If the room has furniture - it must endure.If this is not possible, or works are not "dusty", it can be installed in the center of the room, providing access to the walls, and cover film.
Thereafter, the dismantling of the old coating.The method of its removal depends on the type of finish.Also, in some cases, the sequence does not include the repair of an apartment of this phase, when the new cover is installed on the frame or crate (such as wall paneling, suspended ceiling, plastic panels, etc.).
Then install windows and doors.If their replacement is not available, as the old designs are still in excellent condition, they must be protected from dust and dirt, which is recommended to seal the soffits and trim paper tape.
If you plan to major repairs, it can be carried out redevelopment.Then you need to partition the device.The material for their construction may be different: plasterboard, bricks, concrete blocks, plywood, etc.
Then proceed to the replacement of the heating and electrical work.Implementation of these processes should be left to professionals because they require experience in this case.This is due to the high risk work, as well as the need to count total power, compliance with various regulations, etc.Replacing the wiring and heating can not be included in the sequence of repair of an apartment if you plan to only the replacement of the surfacing material.
thereafter shall plaster work, the surface is prepared for further decorative coatings (priming, puttying etc.).Then she applied finishes, which can act as a variety of materials.The modern market can provide a wide range of different finishes.
And the final stage - the removal of all remaining waste and litter, cleaning and arrangement of furniture, appliances and other interior items.
