most consummate design of the apartment may be spoiled if the walls are present any roughness attracting attention as all household and guests.In this case, before the owner gets a lot of questions.One of which is: "How to align the wall in your apartment?"This requires the select any of a number of method available.
How to align the wall in the apartment: choose the way
Here you have two options: use dry mixes, or use drywall.The chosen method will depend on the method further smooth surface finish.If your choice of stops on drywall, such a coating can be putty, paint or wallpaper paste over that he liked.Such a surface is not suitable for sticking tiles as drywall has too smooth and flat surface, it is not suitable for such purposes.
Talking about how to align the walls of the apartment, it should be noted that most people prefer the dry mixture.It is appropriate to use plaster or cement-sand plaster.On this coating tiles glued much easier, since it has better adhesion.For wallpapering or painting the walls are too perfect.
If we talk about how to align the walls of the apartment, you should consider the stages of work, which depend on the chosen method.First being prepared.For this, the surface should be cleaned of old wallpaper, tiles, plaster unreliable and peeling paint by a trowel, chisel and hammer.All work is important to most carefully, because under a layer of plaster can hide wiring, hidden deep enough.It is de-energized apartment at the time to protect yourself.Before leveling walls necessary to make all the work with electrical wiring and lighting.
alignment walls under the wallpaper with the help of dry mixes
After cleaning the surface must be treated with a special primer, which will improve the adhesion.Aligns to properly setting a provisional special beacons in the form of elements of a flexible aluminum fixed on the work surface that allows you to set the level of all measurements.Further the walls can be applied leveling compound, consisting of gypsum or rotbanta.Mortar should be prepared in full compliance with the instructions.Application of the plaster should be as accurate, consistent.Putty is made only after all the plaster dries.After drying topcoat is necessary to make it through the grind sandpaper.
Align wall plasterboard with their hands not of great complexity.As a beacon in this case will serve as an aluminum profile attached to the wall.To it are attached sheets of drywall.Before fixing sheets to fill in the voids insulating materials.
You can see that on the question "how to line the walls of the apartment," there is no particular difficulty, it is important to decide in what form they will be in the final.
