If the walls of an apartment or house freeze, it becomes a real problem for the residents.The condensate that is formed in such cases, on the surface, it becomes the cause of mold and various fungi, and the type of finish does not matter.Moisture also penetrates into the walls, which is why it is rapidly destroyed.If signs of mold, many owners are thinking about how to insulate the wall from the inside, to get rid of this problem.
It is said that redecorating the walls of an apartment or house will typically be on a very short time.And the use of different antiseptics is also not able to qualitatively solve this problem.Getting rid of the condensate is only possible if it is eliminated the reason for his appearance, that is the freezing of the walls.
How to insulate the wall from inside: options
Naturally, this question bothers many owners of houses or apartments, because the market there are an abundance of materials that can help solve this problem.In choosing the material for insulation, it is important to know about certain nuances.When installing inside the building insulation of any kind is an increase in the depth of freezing and the temperature of the inside surface of the wall becomes much lower.When deciding on how to insulate the wall from the inside, it is important to eliminate air infiltration to the surface to insulate the walls.If you do not, you will be received abundant condensation on the surface of the walls, which makes all the work completely pointless.Improper installation of lathing, focused on securing the insulation may remain "cold bridges".Under all of the elements should be put a thermal insulation material, and all the hardware used must be recessed into the wood and then plastered, which excludes the appearance of unpleasant consequences.
If you are interested in how to insulate the wall from the inside, then you should know that used heating materials to be invested between elements crates without gaps and crevices.Laying insulation is carried out not by the flooring, and from the ground floor.That is why before the operation, remove the flooring, which will provide high-quality and reliable insulation.
When using Loose insulating material is necessary to apply a coating vapor barrier layer.There is quite suitable plastic film that is sufficiently accessible in terms of cost.It is possible to produce foam insulation at home, which also gives a very high quality results.When using the film it is attached by a staple, and if necessary, the use of multiple panels should be imposed on each other with a slight overlap.Similarly, the insulation of the facade is made at home, but this is a separate issue.
after the work done can be a decorative trim with different wall panels or sheets of drywall.
