Banja appeared in human life since time immemorial.Different nations of the world, it has gained a lot of popularity.Since the room - it is primarily a means to cleanse the body with water, there is no tank can not do.This is an important element in this structure.Use water tanks for the baths as a container in which the hot water.That is why you need a responsible approach to their choice.
Selection Rules
tank to determine the volume of the container, you should consider how many people will immediately soared in the bath.When large numbers of visitors said the construction will require a tank with an appropriate capacity, ie at least 80 liters, and with a small number - about 50. In each case requires individual approach.Tanks for water baths should be selected with solid walls.The thickness depends on the tonnage, respectively, of the device.When the vessel 50 liters average thickness is 1 cm, and at 70 - 1.5 cm. Choosing water tanks for the bath should be based on these figures, since the thin walls of the water will cool rapidly, and if too thick, said product isIt will have a decent weight and considerable cost.It is also necessary to pay attention to the expected number of inputs and outputs for water.
Separation types
Tanks for water baths are different.They are divided into an arrangement of three groups:
- built tank.Its mounted in a furnace, where the boiler is located above the bottom of the furnace.Because of this water is rapidly becoming the desired temperature.Because the bottom of the boiler is in contact with fire, the location of the pipe to remove the smoke does not play value.Draw water from above, opened a special cover, or the mounted crane.
- External water tank used in the bath when the furnace is connected to it by means of heat exchangers.The cold water after heating in the heat exchanger flows through the nozzle in a tube leading to said device.Thus, the tank can be positioned where it is most needed.Pipes in this case it is better to use a metal.
- most economical tank is attached to the pipe.Said device will minimize energy consumption.Since the temperature of combustion smoke discharged from the tube is large enough, then the tank hot water bath could heat very quickly.This is an important property of such a product.Profitably be positioned sufficiently dimensional tank, as it will become water heat quickly and uniformly.The main disadvantage of this device consists in the inconvenience of filling, and at the wrong calculation could even boil water.
material products
When selecting the said tank need to pay due attention to that from which it is made.
- The best material for making stainless steel tank is considered.It is resistant to corrosion, easily heated, its shape does not change even when the temperature drops.
- Cast iron pots also have a considerable demand.Their main difference from stainless steel appliances is a slow heating of the water and a huge weight.Cast iron pots are also resistant to corrosion.The main advantage of this tank is a long heat retention.
