Installation of diamond drilling refers to the equipment and tools, the manufacture of which used the hardest mineral.The diamond may be of both natural and artificial origin.In industry, mineral, usually used in the form of powders deposited on the cutting surface.It provides diamond drilling equipment having a relatively higher price relative to alternative means used to create holes in concrete, stone, concrete blocks and other building materials.But the cost of means of production should not be a determining factor.At installation of diamond drilling there are a number of indisputable advantages.
Firstly, to work with the equipment required minimal effort.This is due to the fact that the tool is very sharp.This feature also allows the tool to reduce the heat in the place of cut compared to other Boers.Second, the installation of diamond drill guarantees a virtually perfect holes in a short period of time.The surface finish can further be enhanced when combined with mineral cutting impact grinding using electric current or ultrasound.Installation of diamond drilling minimizes the dynamic loads on the processed material.With this method of producing holes noise and vibration are significantly lower than when using conventional instruments.This provides the safety constructions and reduces damage during processing.A wide range of diameters of bits used in drilling holes enables to obtain up to 500 mm in one operation.This is a significant advantage in terms of productivity.Typically, after use of the tool does not require the use of additional treatment methods.Installation of diamond drilling - the best equipment, if you want to make a hole in a heterogeneous material, such as reinforced concrete.
There are two ways to work with diamond tools: dry and wet.Drilling Technology second method requires cooling water to the cutting plane, which is given together with the dust by a special suction.In this connection, production work using a drill, possibly only in the presence of power supply and water supply.On the life and performance of crowns affects the hardness (softness) ligament diamond layer than it is softer, faster tool wear.
Among the main types of work, where the effective use of this equipment, you can call the device holes: installation of air conditioning, ventilating and air conditioning (vents, openings in walls and partitions), electrical cables, laying water pipes and sewage lines, heating systemsetc.The main criteria that should guide the choice of method for producing holes are time, quality and cost.
