Many beginning musicians, playing the allotted time on the acoustic guitar, the transition to an electrician.And if life has not given them the rich dad, faced with a small problem.Electric guitar without a heap and not very expensive equipment - not electric and silent instrument.Buy have a lot, to the studio is expensive, and money from the garage music fans are usually especially and there.However, there is a solution, and we'll tell you how to connect an electric guitar to a PC.Get a no result can be immediately and free of charge.In addition, your digitized song will enable it to make fun of using different softinok - add the rhythm section, and even the effect of the presence of a tube preamp.
How to connect an electric guitar to the computer?It's very simple!At the two ends of the cord - in one guitar, the other into the adapter jack minijack.A coupler - in pale blue sound card input.Some would say that with the pink microphone input can work, but no.The level of the blue input is much higher than the pink (microphone).I go into detail I will not, but it's probably due to the difference in the frequency range of voice and different audio sources.In our case it is electric.
How to connect an electric guitar to the computer hardware like understood, now is the time of the program.In theory, the guitar may already sound from the speakers.In Vindous have your mixing console - there are set the volume levels for all, it may happen that it is the line-in, which stuck a guitar off, or setting are at a minimum.Then, accordingly, the guitar sound on your computer will be.Incidentally, the Council of the volume.If you want a clean sound, loud place, want to emulate the processor, place the smaller ones.Such a rule is associated with the fact that almost every effect has a Gain (gain).
Volume is to set so that the slider restrict the sound record, giving him go into the red zone.Also, for comfortable work you will need driver ASIO4ALL - they weigh very little and easy download from the official site.Do not be afraid of some kind of terrible settings - everything is simple.In addition, you will understand how to connect an electric guitar to a PC, you will have to wait for the prize - the opportunity to play using the software from the world's leading brands with a bunch of presets and any useful and pleasant things.However, a reservation if you have built-in sound card, it will work poorly.Do not worry - no sound distortion, but it will be quite a delay due to the signal processing of the card.
This is certainly not deadly, just you have to play by the memory of what you have not heard.However, it is better to go to the store and choose a good sound card.This is the only serious waste.
By the way, do not look at us with hungry eyes on the ultra-expensive devices with prefixes ultra-pro-hi super, it is not needed.It may be non-defective and the card for 10-30 bucks.Well, if you're lucky enough to own a good sound card, please - Guitar RIG!
offers technology emulating tube sound Dynamic Tube Response screwing with saved heaps of wonderful tube amplifier, built-in tuner, effects, and a host of professional tools.
As you can see, to connect an electric guitar to the computer is easy.Good luck in the works!
