Motoblock for garden or garden - an indisputable assistant.How it is a shame when you purchased this miracle of technology with only one cutter!After all, you are not available in this case, a variety of operations that would have been free to carry out such a machine.Still, as we would like to plow virgin land or land on which the five years will not revolutionize the formation of soil, or simply make the land of fertilizer.For this purpose, the plow for motoblock you just need the air.
mainly produce plowing in the autumn, when it is necessary to prepare the ground for the next year.Plough for motoblock with the cuts and turns the soil.It forms large clumps and clods that crop before planting necessarily divide cultivation.
Plough for motoblock made from tool steel, so it can withstand the load corresponding to plowing.However, we must take into account the density of the soil itself, so as not to overheat the engine and do not jam behind tractor.
Form plow for walking tractor has similarities with a metal comb.They he pulls stratum of earth and turns it over.This is facilitated by a special form of the instrument, as well as the expansion of the ridge at the top.
How to buy a plow for walking tractor?Practical advice
purchasing a plow for walking tractor, you need to watch closely that he envisaged the manufacturer needed to adjust features: tilt angle and cutting depth of the soil layer.Only with these settings, your work will be complete and effective.There are several models of plows for power tillers, among them: PL-2km, PL-strand-un, PL-instrumentation, PL-VH 220, PN-1, PN-Junior, submarine-GN-151, NP-Pubert, PL-ON, Mon-Pubert and plow-blade Futura 6 ". You must also pay attention to the detachable blade of the plow for the possibility of sharpening. This will allow easy and at the required angle to hone its cutting edge.
important indicator when you choose reversible plowfor motoblock, should be considered its size. After all, with a huge amount of the unit can he not draw, while small enough to work effectively. You can, of course, be applied to increase the productivity of just two of the plow, while the capture of such tools increases, respectively, twice. It is also desirableto plow had a hitch, which can facilitate the process of adjustment. Let's look at how you can make your own plow for walking tractor.
independent production
himself to make the plow for walking tractor is not too difficult.You can do even without special equipment.Only by taking the workers for steel elements required thickness (3-5 mm) and using the tool, which is located in the garage every self-respecting host.
start of production of plowshares.It is made detachable, for example, a disc saw blade.This cutting portion discourage the anvil, as is done for the spit, and further sharpened.
Thereafter manufactured blade, taking as a blank half-meter diameter pipe with a wall thickness of 5 mm.Then, the pattern is cut gas welding workpiece blade, which further grind grinder.When the two parts are ready, we can only make the plow body from steel of 2-3 mm and assemble the structure.
As you can see, a homemade plow for walking tractor - not such a difficult task, if you get to be creative and enthusiastic.
