can often find the problem, when the pressure of water supplied centrally, insufficient to meet all the needs of the consumer.This applies to both urban and rural water supply systems.In the city the problem could be related to the fact that the apartment is located on the upper floors of apartment buildings.This is especially true of the old housing stock, where the system is not designed for modern consumption of water.In rural areas, the pressure is weakened, as a rule, in the irrigation season, when a large amount of fluid pumped for agriculture.Many electronic devices need a certain minimum water pressure for proper operation.This also applies to washing machines, as well as for gas and electric heating systems.There are situations where some users may altogether be left without water.
To resolve this problem often use pumps to increase the pressure in the system.
Pump selection depends on the specific situation.If your tap water is available, but flows too weak, and the problem is somewhat increased water pressure at the outlet, the problem can be solved by a conventional pump pressure rises.These devices vary in power and an increase in pressure.Starting from the most basic (pressurized at 1 atmosphere) to the heavy-duty (increased to 6 - 7 atmospheres).We must remember that performance affects the size of the pump, as well as energy consumption.If you choose to check the availability of space in the bathroom for the installation of a device.Install them by tapping into the pipe.
two possible modes - manual and automatic.The second option is preferable as it prevents undesired running dry.In automatic mode, the motor operates only when the water - is, among other things, allows you to save energy and.
is necessary to pay attention to the method of cooling the engine.Modern pump pressurizes the water is cooled by the flowing fluid.The main advantages - the reliability of the method and quiet operation system.Furthermore, cooling is applied by the impeller motor.When selecting such a pump must be considered that the work he produces some noise.
In addition, the purchase should pay attention to whether the pump separately for each system (hot / cold water), or it is universal.The choice here depends on your needs.
consider the second variant of the problem - if the tap water is not available, but you know for sure that it is in the system.In this situation, you will be able to help only self-priming pump station, increasing the water pressure.Such devices are capable of raising the level of the water up to 8 meters.When choosing a pump station Note the presence of the accumulator.
So, in order to choose the right pump to increase water pressure, you must decide on the following items:
- need a regular or self-priming pump station;
- how much pressure you need to get the output (depending on the number and power of devices connected to the system);
- how much space you are willing to provide for the placement of the device;
- a sum of money to dispose of purchase.
studying the characteristics of a particular pump, pay attention to:
- engine power;
- maximum water flow;
- protection class;
- diameter of the pipes;
- the maximum temperature of water (can be used for hot systems);
- size and weight.
Before you decide on the purchase of a pump or pumping station, make sure sure that the problem with water pressure was caused by insufficient pressure, and not other factors, for example, clogging pipes, etc.
