Many say that the transmission "mechanics" is more difficult to manage than the "automatic" and newcomers to master it is very difficult.In fact, the principle of driving a car with manual transmission can be learned in a day, and if you work hard, then a few hours.Be sure - in a few weeks you will be driving a car like a pro.Today we will tell you in detail how to get under way on the mechanics and transfer switch to manual transmission.
It is known that vehicles with manual transmission are supplied with three pedals.From bottom left serves as a coupling medium - the brake, and the right - gas.Their we will use when driving.
Step number 1 - Run the engine
So, let's look at how to get under way on the mechanics.First, you need to pay attention to the gearshift lever.On top of it there is a shift scheme.It should learn to not further distracted by the extra traffic and views.Driving the shift is very primitive, so a couple of days away, you automatically learn it by heart.But back to the topic.Before you turn the ignition key, always make sure that the gear knob is in a neutral position.For this tug the lever to the left and right.If it moves freely, quietly turn the ignition key.If the machine is "in gear", press the clutch pedal and pull the handle to the PPC itself as long as you do not feel that it moves freely.
How to get under way on the mechanics?Step # 2 - "Let's go!ยป
After starting the engine again, pull the clutch lever and shift back to "1", that is, engage first gear.Now the fun begins.Slowly release the clutch pedal and, as soon as the car started to move, we press on the gas.But not in the floor, and slowly and carefully, until the tachometer needle is in the green scale.If strongly sharply release the clutch, the car abruptly move first, and then stops.If direct the gas pedal to the floor, the car takes off in seconds from the place, so much so that you even fail to react.Therefore it is best to train in a special area or racetrack, near the poles where there is expensive and "Mercedes".
Learning to ride a mechanical change gear and
After the car moved off and reached turnover of red scale, switch to 2nd gear.For this release the gas pedal, squeeze the clutch and at the same time move the gearshift lever to the desired position.Releasing the left pedal, but not dramatically.Once you feel that the clutch is almost released at this point, press gently on the gas and only then release it.It is worth noting that the more powerful engine of the car, the less it is necessary to put pressure on the trigger.
And by the way, when it moves, if the family VAZ "classics" or Gazelle, you need to press the gas pedal, the car is not yet started moving.Only when the tachometer needle entered the green bar, hold the left pedal.
At this stage, the question of how to get under way on the mechanics, can be considered closed.
