In the event that Windows notifies you about a weak signal router's Wi-Fi, this may mean that the speed of the connection is too weak and does not meet the declared level.Even worse, if some place in your home or office at all signal disappears.However, the problem can be solved so as to amplify the signal Wi-Fi, independently.There are several recommendations to improve the signal.You can read them below.
1. It is necessary to place the router is Wi-Fi in the center of the future network, it is best indoors.If the access point is located outside the building, while with the other hand to enhance the signal will be weak.If your computer is located on the second floor, and the router - the floor below, it should be placed as high as possible, for example, in the closet.But do not worry if this is not possible, since there are many ways on how to strengthen the signal Wi-Fi.
2. It is not necessary to install a router close to the wall, on the floor, and metal objects, which would interfere with and prevent the spread of the signal.
3. With a low signal is to check the antenna device, and replace if necessary.Antennas that are shipped with the router Wi-Fi, are omnidirectional.If the device is near the outer wall, half the signal will go out.Most routers do not allow to adjust power gain.If necessary, you can purchase an antenna that will provide signal amplification in one direction.To select the amplifier Wi-Fi signal, you can use the help of a consultant in the store, which specializes in such equipment.
4. The problem may be with the network adapter of the notebook.Typically, computers can be connected to Wi-Fi networks are strong enough antenna, and update a network adapter is not required.This recommendation applies to laptops that do not have Wi-Fi cards.As is known, the signal must be sent not only, but also adopted computer.Appeared to have an Internet connection, the router can transmit a signal powerful enough, but not always well-received signal.
5. To extend the range of your wireless network, which will solve the problem of how to amplify the signal Wi-Fi, you need to install a repeater.At the same time you do not have to stretch the wires or worry about a serious adjustment.Wi-Fi repeater is easy to install in the middle between the computer and the router.
6. Wi-Fi router can transmit a signal over multiple channels like radio.To enhance the signal, you can try changing the channel on the router configuration page.The computer will not have to change the configuration, since he will be able to automatically identify the channel.To determine the configuration page.You can see the instructions that came with the router.However, solving the problem of how to amplify the signal Wi-Fi, we should not forget that the network security is no less important than performance and speed.
7. For signal amplification is necessary to reduce radio interference.Many microwave ovens, telephones and other equipment operating on the same frequency as that of the router.If you actively use such devices, the computer may not catch the signal router.
8. Manufacturers of these devices often release updates to the firmware and drivers.Often, these improvements significantly improve the performance of the router and optimize the signal.
9. To improve performance, you should give preference to the equipment from the same manufacturer.Some of them even promise improved signal twice using the complete set of hardware.
We hope that now you will not have problems with how to connect wi-fi at home and increase its signal.These skills are very useful for all those who use the Wi-Fi router.
