Modern materials provide ample opportunities for the transformation of the interior design of the premises owner's taste.If you yourself have started repairing the ceiling, you can face the fact that will have to choose from several options.There is tension, adhesive, boarded, and suspended plasterboard ceiling.Along with them is a familiar option, and plastering.Let us dwell on a detailed examination of how to create a two-tier plasterboard with their hands, what rules you must follow.
Preparation ceiling
Installing ceiling plasterboard harder than podshivnoy, but there are general principles.You must create a two-level suspension design, not only parallel to the ceiling, and perpendicular to it.To begin the ceiling should be cleaned and free from the plaster, and then the gap formed between the plates, proshtukaturit.
Before you execute duplex plasterboard, it is necessary to take care of the necessary tools.This will require profiles UD and CD, press washers, dowels, nails, screws, metal, mounting plates, through which will be attached to the ceiling metal profiles and drywall hammer, which will need to drill on concrete.Also need a Bulgarian and a knife, designed for cutting drywall, water level and screwdriver.
two-level ceiling installation
Before starting the installation, it should be noted that establishing a two-tiered plasterboard, you can not do without an assistant.Since at high altitude alone to fix the sheets of plasterboard is very difficult.In addition, it is quite moody stuff that requires precision work.
First you need to define a point, which is relative to the bottom floor to the ceiling.From her via gidrourovnya and marker thread around the perimeter of the need to discourage the level of the future design of the ceiling.To mark the boundaries of the ceiling frame can be used and laser levels.
At the beginning of the frame for the planned line to attach the profile UD.Then you need to embroider the ceiling profile CD and down.It is necessary to observe the distance between the profiles, equal to fifty or sixty centimeters.Each band profile CD need to be fixed to the ceiling using mounting plates and dowel-nails.To avoid bending the profile perpendicular to the CD-profile pull the nylon thread.
To create a two-tier plasterboard, it is necessary to mount the next level with the help of the first press washers.The frame can be rectangular or curvilinear.In order to obtain a bending radius grinder profile to be cut into pieces of five to ten centimeters.Attach the drywall to the frame with screws possible.And "sew" them the whole ceiling is not necessary.It is not necessary to fill the entire first level of the ceiling, if the second covers a large part of it.
to form a sheet of the desired size, it is better to use a cutter or knife.If the width of the sheet is 50 or 100 millimeters, is affixed to the base layer corresponding to the width of the profile.When installing the ceiling levels need to close the ends of the plasterboard sheets is first necessary to make an incision on one side.After the two-level ceiling of plasterboard is fully assembled, the parts sheets that act, you must trim knife.Between parallel profiles for strength should put pieces of the profile of equal length.
At the end of the seams on the ceiling to paste serpyanku.Bends decorate the arched perforated profile.The surface of the ceiling cover layer of putty 2-3.When it dries, you can begin painting the ceiling.It is convenient to apply the paint with a roller with short nap.
acquainted with the material, it is possible to cope with the problem of how to make a two-level ceiling, without resorting to the services of specialists.Moreover, adhering to the basic rules, there is an opportunity to show their imagination and design skills.
