This publication discusses how to configure the modem "D-Link" - one of the modem lines corporation "D-Link".All of them are simple enough and comfortable in the setting.In this case, as an example, we will learn how to configure the modem "D-Link 2500U".It was he, perhaps, the greatest preference is given to ADSL-Internet users.
offers instruction allows you to configure almost any modem from the line.It may be "2600U", "2650U", since they are all configured identically or, at least, all of the settings have similarities.Consider the connection and configuration of the device, we will of points:
first point - Connect the device to the telephone line: for all these modems characteristic that they have to be connected to telephone lines.For this purpose, they are complete with special wires with connectors (connectors), which are essentially telephone wires.Nowadays these telephone lines are connected to a phone jack through special "splitters" (filters).This is done in a stable and fast operation of the Internet and to suppress noise in the handset.
How to configure the modem "D-Link"?The second point.Connect the device to a computer: at this stage of the process should have no difficulty even inexperienced PC users.It is easy to remove from the package with the modem cord blue insert one end into the appropriate connector ADSL-modem.The other end, respectively, inserted in the corresponding port, which is located on the rear wall of the PC.If not available, you'll have to fork out to buy a network card.
Suitable any, even the most inexpensive 10/100.It should be installed on the motherboard connector PCI.The operating system "Windows" should automatically detect the presence of new equipment, which will be marked by the appearance of the window with network selection.Select the desired item: "Social Network".No other settings are network card should not be changed as they will be generated automatically.
If everything is connected correctly, the modem "is" light, above which is written "LAN".
third point.How to configure the modem "D-Link" to connect to the Internet?Species such connections modem-ADSL, there are two: 1) bridge (bridge) and 2) router (router).The difference is that the connection is a "bridge" refers to an independent computer connection to the Internet, and connection "router" - this means that the modem will connect-ADSL yourself, "handing over" then Internet PC.Consider the connection "router" as PC users find it preferable.
How to configure the modem "D-Link" and connect to the network "router:
- turn on the device, wait for about 25 sec. Until the light comes on with the inscription« Power ».
- On the back of these modems have a special hole exercisingaccess to all settings reset button. It is necessary to press when the modem and wait about ten seconds.
- We wait for about a minute.
- run any Internet browser, type: 192.168.1.1, a window will appear in which the fields login andwill need to enter the password - "admin". You will see another page. If not, you need to try to enter: 192.168.0.1 (192.168.2.1). If the message "Wrong login (password)", enter "Admin" (with a capital letter).
- left click "Quick Setup" (in some versions of "Wizard") and see a new window.
- unchecking a "DSL Auto-connect", see the new fields for administration of relevant parameters.VPI and VCI are recognized provider.
- In the next window, note the "PPP over Ethernet (PPPoE)" and click "Next" ("Next").
- Now we come to the proper login and password, known from the contract or a credit card.
- other settings must also tell the provider as they may vary.
- By clicking "Next", you will see a new window in which settings can not be changed, but left as it is.Again, "Next", and appeared to change settings is strictly prohibited, unless you are an advanced computer user with a great experience.Once again, "Next", and save your settings by clicking "Save / Reboot".
practice it all.Within a few minutes, when properly configured, the device will begin to flash lamp «i» or «Internet».It says that everything is done correctly and functioning properly.
