Surely many car owners had to scratch their cars.And even though the consequences of such an accident sometimes insignificant for interior design of the car, which arose vmyatinka or scratch on the paintwork is very noticeable.Some drivers do not attach any special significance and continue to ride on the machine posharpannoy.However, what happens if we look at the vehicle from an aesthetic point of view?When looking at the appearance of battered and scratched car immediately formed a negative impression of its owner.A well-maintained car - a business card of the owner.Therefore, we must take care of his appearance.In this article we look at how to repair the body with their hands.
Choosing paint
If the surface of the machine there a scratch, to fix the problem, it suffices to have the appropriate paint and primer.However, if the structure was damaged and the metal itself, acquire additional filler (but we'll talk about it later) and apply it to the body.Repair their own hands paint using so-called "pencil to correct deformities" useless.The fact that by using this tool can only be partially conceal any visible defects, since the thickness of the fill is not always meet the depth of the gap scratches.Choosing the paint must be very careful.Never try to trim bottles at random.Even if the color will be the same shade can be very different.Number of paint must be fully consistent with the fact that the manufacturer has put on the body.
repair their own hands: shpaklyuem, gruntuem and paint
As for the primer, it can be of two types - for paint and metal.The use of a particular type depends on the extent of the damage.If, after an accident on the body also formed a dent in this case, no putty you can not do.First we need to degrease the surface and roughen it with sandpaper.After prepare putty and apply it on the affected body.Repair their own hands in this, of course, does not end, and is caused by the material dries up, we quickly align its surface.After drying putty dent it will not be so noticeable, but to achieve the desired result should once again go over it with sandpaper.Then you can prime the body.Repair their own hands should be carried out using the second type of aerosol even if your car is a domestic production, the primer must be imported.Apply it in a single layer and go to paint the body.Apply the material must be in three layers, in order to fully disguise microcracks.For extra shine, you can cover the surface varnish.Below is a photo of the car, who suffered a minor accident.
left - photo to putty and paint, to the right - after.The result is impressive, is not it?And this despite the fact that the repaired body with your hands, without the help of professionals.So will you, and if you follow all the above instructions.
