How to clean a computer at home

click fraud protection

Every PC owner sooner or later faces the need to clean the computer.Moreover, a simple cloth wiping dust from the cabinet in this case can not do.The first suspicion that it is time to perform a thorough cleaning of the system unit appears the user at the moment when you start your computer the first few minutes later there was a rather loud monotonous noise.Every day (a week), it is becoming louder, and if you continue to operate in this mode, and do not try to figure out how to clean your computer, noise accompanies all time.As a result, you can expect the following failures and deadlocks.

user novice usually frightened and looking for an opportunity to take the system unit to the service center, where for carrying out any cleaning required to pay.Require in any case, regardless of the warranty period is ended or not.This point is clearly stated in the warranty sheet.And as in a plastic bag desktop computer will not carry away, we have to take him by car, which means additional costs for fuel and their time spent.It is much easier and quicker by yourself to learn how to clean your computer.In addition, for the safety of the data on the hard drive in case you can not worry: to give a computer, which has the access codes to your own bank account to strangers, rather risky.Exception: Computer sealed warranty sticker, and the period of service has not yet ended.

assume that all the conditions are met, the owner has read, how to clean your computer, and decided on their own to restore the performance of your electronic assistant.Turning off the power, pull out all the wires (it is desirable to remember where what was) and put the body on the left side of the table lit up.Unscrew the two screws holding the cover and shifts it back.It opens access to all components.It remains only to recall how to clean your computer, and perform this operation.

Internet pages are full of recommendations for cleaning.Even if incorrect formulation is easy to get the desired response to a question on how to properly clean your computer.

In fact, nothing complicated about it: a little bit of practice and cleaning can be carried out even with your eyes closed.The source of the notorious noise, because of which have to deal with the body, are active cooling fans.Their number of all different, but certainly is on the CPU heatsink and power supply.Take a brush (for painting or special, it is not so important) and gently clean off layers of dust on the blades of the fan available.Purely from both sides!If difficulties can use the classic way: cotton wool, wound around the match.It is rarely necessary to further moisten cotton wool with alcohol (up to wet conditions without drops).

Then dry wool eliminate all visible dirt from all the elements.

Now there are two ways:

- connected to a vacuum cleaner nozzle narrow and so remove all dust showered on the board.It is advisable not to touch the components as static discharge from the vacuum cleaner can damage the computer;

- make the body into the street, and connecting the nozzle blow-out, remove all dust.A cloud of dust is provided, so do not do so in the room.Of course, no one bothers to blow out the dust and the old fashioned way, without technology.

Now unscrew the bolts that secure the power supply.Remove its cap and clean the blades of the cooling fan.The capacitors can be retained residual charge, so touching your items should not be soldered.

assembly is performed in reverse order.Such cleaning is not always eliminate the noise, so do not forget to add oil to the bearings and, if formed the hub, and then replace the entire fan.But that's a topic for another article entirely.