now rarely seen on the street or on public transport youth without headphones.Someone listening to music, someone audiobook someone learns a foreign language.Due to this popularity, this headset is constantly being improved, going to a higher level.And today is no surprise in this newfangled invention of mankind as wireless headphones.They differ from conventional in that they do not have cable.On the one hand, it is very convenient: no need to constantly lots of wires, but on the other hand, it is noted that the quality of sound in a headset is a little worse than the standard.Wireless headphones are divided by the method of transmitting a signal to infrared and aural.The first type is more resistant to different interference, but the distance from the sound source thus can not exceed ten meters.The second type is able to operate at a distance of hundreds of meters from the source, but there will be more noise.
How to connect wireless headphones ?It is not difficult.Look at the computer system unit: on the front of the panels (unless, of course, it's not a very old model of system unit), you will see the connectors of USB-ports and sockets for TRS-compounds.To connect the headset, you can use both.First of all, you need to install the driver, but the database available to the operating system, in most cases it is quite enough to do without outside interference.Next to
If you are lucky and your computer does not detect the driver, you have to install the software CD.Before how to connect headphones , look at the packaging on your headset: it must be there.When inserting the disc, a menu appears where you must select the option to install the driver.After that, all you need - is to follow the instructions of the installation wizard, which has already started.When installation is complete, the operating system will attempt to re-connect the adapter with the new driver.To complete the procedure, how to connect headphones , you need to install the batteries and turn on the power.As you can see, nothing complicated.If you carefully follow all the instructions, then you are sure to succeed.
course, is not all got a wireless headset, so here a few words about, how to connect headphones shares, which have a cable.For this purpose you need to use connectors for 3.5mm TRS connectors, such miniJack.As mentioned above, they are located on the front of the panels of the system unit.Results of these two slots, and each of them has both its own icon (identification badge), and coloring.Pink connector for connecting a microphone, so it us, in this case, is not necessary.But green - it is exactly the same, where the headphones are connected.Insert the plug of the device (it can also be colored green).Driver sound card that is installed in the system can thus display a small dialog box where you will need to confirm that the device is connected to the computer, the system is defined correctly.
Here, perhaps, and all.Now that you know how to plug in your headphones, you can seamlessly enjoy your favorite music or other audio recordings.If, however, you will need to make additional configuration sets, go to "Control Panel", find there the option settings Sounds and Audio Devices, and then proceed to your liking.
