Inkjet printers are the most affordable solutions for outputting digital information on paper.There are only a few firms involved in the mass production of such printers.This Epson, Canon and HP.Other vendors (such as "Samsung"), more commonly known similar devices of a different type.As you know, the cost per print is made up of the prices of ink used, paper and related expenses - electricity, printer wear.
Thus, we can work with the device is much cheaper, if learn how to fill the emptied ink cartridges instead of buying the factory, the price of which is often more than half the amount spent on the purchase of all of the printer.The challenge is to fill the cartridge Canon, is solved in two ways: an appeal to companies providing such a service, or yourself.Obviously, the second much cheaper.Today we'll show you how to fill the cartridge Canon Pixma.These principles apply to all other inkjet devices.Next we look at how to fill the cartridge Canon-510, since this model is still popular.Let's start the process ...
Preparation
Although how to refill cartridges Canon, there is nothing complicated, just before the operation should perform a series of actions.First of all, you need to prepare in advance of syringes with thin needles themselves the right color ink (the number depends on the model), disposable plastic gloves, thin drill or a drill with a diameter of about 2 mm, dry wool, paper napkins and a few old newspapers.Syringes acquire necessary, given that they are used, one for each color (no cartridge!).
How to refill a cartridge Canon
plot table, which will be carried out by refilling ink tank, you need to carefully hide several layers of newspaper.Otherwise, the leaked ink will have to wash the surface.And that, believe me, no flushing fluid is difficult.From the first printer cartridge is removed and placed on a side table.If the print head is combined with the container, it is necessary to be careful not to damage the nozzle.Cover from the top of the cartridge should be removed, but do not throw away - it is still useful.Under it is the structure of the channels, converging to the plastic range (one in black and some in color cartridge).At this point, the drill must be carefully make a hole.Worry about the chips coming into, it is not necessary - there is a porous material.It is required that the needle diameter was smaller than the resulting hole.This is an important point that people sometimes "forget", telling how to refill cartridges Canon.Now you can wear gloves and get to work with paint.
Fill
In the case of the black print cartridge is simple: type in the syringe 2-4 ml of ink, insert the needle into the vessel until until you feel resistance (the upper part of the absorbent material).This is usually 0.5-1 cm. Then, slowly squeezing the ink cartridge.Typically, 4 ml is enough - when filling Nedolya better than to pour.After this return label on the cover into place (this will reduce the drying and evaporation) and put the cartridge into the printer.But for color capacity a bit more complicated: the cover will have to make three holes and determine the color matching (and sometimes disturbed the order).By type of cartridge and the name you need to know which hole corresponds to what color.In principle, you can just carefully inspect the cover.For each paint a syringe.More than 2 ml per color is not recommended.The procedure is identical to the above filling.Cotton wool and tissues may be needed in the event of perezalivke when you need to wipe the cartridge.
