Experienced motorists are probably faced with the problem of mechanical damage to the interior door trim of the vehicle.Often, minor damage can be repaired without removing the trim from the door, but sometimes there is a need for complete dismantling (for example, for replacement or restoration of upholstery).Also, the need for removal of the upper part of the door is caused unforeseen damage to wires or other mechanisms located inside the door.Besides all this, the car will need to be removed in the case of works of upholstery soundproofing.In this article you will learn how to remove the trim from the doors of its iron friend.
Who to contact
If you still do not fully know the design of their car or just afraid to make a wrong move, accidentally damage some wire, refer to the service station.Then this business will be engaged professionals, and you will no longer think about how to remove the door trim "Priora" or VAZ "Kalina".But if you are confident in their ability to make it all possible and on their own.To do this, you do not need to use any expensive tools, screwdrivers and bottom enough basic knowledge about the design of its doors.Thus, you save time and money.
Removing the door trim?About nuances
Before removing the casing, consider the fact that in many import cars (and some Russian) at the door is a special electronic system that monitors the various failures of the engine and suspension systems.Repeated removal of door trim may result in the complete loss of data on all malfunctioning machine.Also can be lost the radio security code, and how to remove the door trim are you going to do, you should follow the accuracy of their actions.Remember that before you make such work, it is necessary to disconnect the battery terminals.
Removing the door trim?A phased process
First, you should understand the rear-view mirrors, or rather with their adjustment mechanism.If the mirrors are adjusted using the hand control, you need to unscrew the special actuating lever.And in order to prevent damage, remove the door trim by using a Phillips screwdriver.If you have an automatic adjustment mechanism, better still refer to the service station, since the design of the adjusting device is rather complicated.The next stage - the dismantling door trim.This is done using a screwdriver, too.If there is a triangle in the skin, you need to remove the door latch button.Then unroll alternately every bolt that holds the upholstery on the metal structure itself.
Follow the accuracy of their actions, or the traces of a small screwdriver to remain on your skin of all.And to reduce the risk of scratches, place a small piece of cardboard liner.Everything, at this stage, the process ends.As you can see, remove the door trim "Priora" is not so difficult as it seems at first glance.
