Each of us in life have to tie knots, whether it is on the bow or on the shoe.But perhaps the most necessary and most useful in our lives nodes - tourism.They are especially useful for those who suddenly had a desire to become a real tourist or someone already on the way to this, it is extremely necessary to be the ability to knit tourist sites.After all, the quality of work done can depend even life is not only the tourists, but also his teammates.Therefore, no harm will this knowledge, even though, no matter how secure life was not to campaign.Better to be safe because no one really knows what the road will have to expect around the next corner.
general practice in tourism there are many wide variety of sites, which differ in their functions, but the most common and simple are the nodes, which are called eight.Such an assembly is suitable for fixing the rope in the narrow opening, for example, when it is necessary to fix the rifle.Make it pretty simple: you have to tie a rope in a figure eight, running the end you have to make a closed loop.The working end of the rope around the precinct of the indigenous, then skip this end at the intersection in the loop.
The next group consists of tourist sites called bayonets.They are mainly used in order to secure support for a rope round shape (a pillar, for example, can be a tree).The current end of the cable that you obkrutili around the support you need to enclose around the main part of the cable, and then be passed through in this case formed a loop.The resulting unit will be the end result.It is also called polushtykom.However, this can not stop and enclose the main part of the cable end of the current, then skip to the loop, and then fasten the auxiliary rope.As a result, you get a node, called a simple bayonet.
hinges, which can be in the middle of the rope can be used as intermediate points of support, as well as if a rope is damaged in any way.Another famous tourist hub is an Australian conductor.To make this unit, you need to put the rope in a figure eight, the upper hinge to bend to the ground and pull it through the bottom of the lower hinge.And in the end simply tighten the knot.
If you need to link the cables that have different diameter, in this case, is usually applied Bram-spindle assembly.The end of one of the ropes should be tied in a loop, and the securing of its tapered for greater reliability.Work the other end of the rope to pass through the loop, tie it twice, then twice through the root end, and eventually tightened.To Bram-spindle assembly was held, I need some traction.But if you thrust suddenly retracted, such a node does not fall apart.Tourist sites schemes are fairly simple and understandable to all.So if you want a professional to tie tourist sites, you just need to work out according to the instructions and diagrams.
