When laying tiles on the wall or floor is of great importance, which uses adhesives.For porcelain - is one type, for wall tile white or red clay - other.The difference lies in composite components.The dry adhesive for porcelain tiles are sand-cement mixture with water soluble polymers in certain proportions.Due to these components provides ductility and toughness of mass and adhesion material.Modern high-quality adhesives for porcelain tiles are characterized by high technical and operational characteristics, such as resistance to temperature changes, moisture resistance, frost-resistance, flexibility, adhesion strength and high adhesion.The difference between selecting an adhesive mass for floor tile from the wall is that granite has low water absorption threshold, hence the so-called cement milk is absorbed into the pores of the tiles, and eventually will be formed between the surfaces of the voids.This, in turn, lead to cracking and backlog of tiles from the floor surface.Therefore, the issue should be approached seriously.
Successful laying tile flooring and a long service life is largely dependent on the training grounds, as well as what kind of adhesives for porcelain tiles you use.Even on the packaging with the mixture always prescribed that only work properly with a smooth, primed surface.An important tip: before buying consult with the seller of tiles, check the technical characteristics of the selected material, and consider the particular area in which you will make styling (inside or outside).Glue for ceramic granite, the price of which varies depending on the constituents, plays a big role in how long can serve selected tiles for the floor.Therefore, buying expensive tile with high technical performance, do not skimp on the appropriate adhesive material.
consumption of adhesive for porcelain tiles is easy to calculate.Since the tiles exposed to a constant load, there is an unwritten rule: the thickness of the adhesive layer is equal to the thickness of the tiles to be laid.Also, consumption is written on the packaging with the mixture.
Adhesives for porcelain to be stacked on top of floor heating should have the following properties:
- elasticity.
- Increased adhesion to the substrate.
- ability to equalize voltage, which arises from the difference in temperature.
Tip: Before you turn on the heating of the floor and wait for the complete drying of the adhesive composition.
In case the installation is carried out in complicated environments (outdoors, in utility room, etc.), it is better to use a two-component adhesives for porcelain.They are more resistant to changes in temperature and humidity.And it contributes to the durability and long service life of the selected coverage.
for laying tile on wood, metal, plastic and the like surface using adhesives for porcelain tiles on a polyurethane or epoxy.
