When the construction of a country house is nearing completion, it is time to think about the arrangement of the infield.One of the important elements of its design are garden paths that connect all the important facilities are throughout.They should be not only beautiful but also functional, in harmony with the main building and the adjacent buildings, organically fit into the overall landscape design.
If you decide to build on the site at a wooden house, the best solution for the arrangement of the area around it will be from the garden paths cut down a tree.The technology of manufacture of such paths is known for a long time, in this way paved approaches to the noble estates.
tracks cut a tree from very beautiful, environmentally friendly, are not exposed to moisture and temperature extremes.Furthermore, such garden items do not require any costly.Using materials left over from the construction of the main building, the old felled trunks or logs, you can create a beautiful garden paths made of wood with their hands, which will serve as the spectacular decoration of your site.If desired, in a similar way, you can put the area in front of the house or to make an original patio.
tracks of cut down a tree are the order of ten years.To increase the life of the die is recommended to treat antifungal composition or varnish - it is required to warm up to a boil and put on the wood surface with a thin layer on both sides.After antisepsis saw cut should be thoroughly dried.
best material for the manufacture of paved paths considered larch.However, it is possible to use other species of wood: pine, aspen, oak and so on. During the construction of the track need to cut down a tree to saw the logs available to the die thickness of about ten centimeters.You can artificially aged stuff.To do this, you need to treat wooden clubs received copper sulfate solution - they darken and will look more original.
When the material is to be prepared, you must mark the direction of the trails.This is done with the help of a rope that is pulled over the entire length of the pegs on the intended track.After that you can start building a foundation for future trails.It is necessary to carefully uproot all the weeds, so that later they do not sprouted between the elements of the path.Since wood is easy to absorb moisture, it is necessary to pave the path for good drainage.To do this, remove the layer of soil (20-25 cm), align the bottom of the trench, fill it with sand or gravel, moisturize and compacted.Such layers should make several.To cut a tree out of the track over time has spread not, you need to indicate the outlines of a border.Make it can be from anything: the remnants of brick, stone or concrete.Now it is possible to stack die, and the gaps between them should be covered with sand.
If you plan to surround the lawn track, the gaps between Spili can be filled with soil with grass seed.Then the trail more harmoniously fit into the overall landscape design.So, using the most simple materials and a minimum of effort, you can get comfortable, simple and aesthetic path that complement your site.
