inexperienced builders usually self-taught most concerned about the issue of how to lay down the tiles on the floor or wall.As a rule, the minimum work experience of facing many of them have, however, conduct quality tile requires much more knowledge than it seems at first glance.
about how to lay down the tiles properly, easy to learn from the pages of literature, which is more than enough in the printed and electronic form.However, this article will try to review the basics of this idea, and certainly in view of the various features of the configuration of a particular tile.Before we proceed to the immediate development of technology tile business, you need to decide the terms of the necessary tools and materials.You need:
- tiles;
- adhesive mixture;
- water;
- trowel;
- spatula;
- primer;
- paint roller and tray;
- large bucket of 30-40 liters (preferably metal);
- notched trowel;
- punch (drill) with paddle-mixer;
- Bulgarian;
- Tile;
- crosses for tile joints;
- mix for mashing.
Before you lay down the tiles, you must carefully prepare the surface.Perform such work must be aligned on the walls and on the floor in the presence of a large curvature have to make a tie.Many people do not pay attention to the preparatory stage, which helps get rid of overspending expensive tile adhesive and significantly improve the quality of the masonry.Following the alignment necessary to clean the surface of the litter and dust, then prime it carefully.
tile How to lay down further?It is more logical to start laying from the walls, the floor is made from a small indentation.If it is covered with tiles or other material, it is necessary to take into account the future thickness of the coating.Recommended for use indentation flat rail of appropriate dimensions, which will comply with the required distance around the perimeter and do not give the tile sliding.A good solution is also the carrying out of preliminary marking.
Having prepared tile adhesive must be smooth side of the toothed double spatula evenly to its technical (back) side of the finishing material.Toothed side need to remove the excess glue, trying to do it without bias.Outlining place for tiles, you must attach it to the surface and carefully press.Do not forget that it is imperative to lay the tiles using the spirit level and special crosses for joints.
Similarly, laid tile on the floor.A few days later, you can proceed directly to the grouting.In the construction market today are a lot of different materials, for this purpose, and therefore a matter of choice will not stand.
With other parts easily available directly on the fly.How to lay down paving slabs?To understand technology and its installation is quite simple, but let's talk about this in the other articles, because such a process has its own specifics.
