When the strip foundation is properly installed, it provides assurance that it will be a reliable basis for future building.The main feature of the building's foundation is its good stability, balance and proper compensation of all power loads.Therefore, one who undertakes such work, should know how to pour the foundation.
If you are starting for the first time to establish the foundations, then at first that something could go wrong.However, do not despair.In this article we will explain you how to pour the foundation of the house.
First of all, it is necessary to do everything to be sure exactly like the monolith was strong and reliable.
Starting fill his own foundation, you need to have a little theoretical training.Begin to prepare the site for the foundation.If you notice that at the construction site water accumulates, there is no need to wonder if they need a place in the drainage.No geological survey is not enough.Before you pour the foundation, calculate the load on the basis of the future and develop the scheme.Be sure to decide the parameters of the structure and its weight.
At zero cycle, the main role is given to the foundation.You need to calculate in advance what costs need to plan for this building.Therefore, you should choose the best option to install the foundation and a rough estimate of the future costs to it.Before you start pouring the foundation, need to perform excavation work at the site.To do this, delimit and mark pegs.All you need to do exactly that and then start pouring the foundation.
At the bottom of the trench must be put a filter "litter", consisting of 10 cm and 5 cm schebёnki sand.Then you need to apply fixtures with a diameter of 8-10 mm.Because it forms a grid.The pouring of the foundation parts is not recommended to not formed connecting seams.They are considered the weak link of construction and, therefore, differences in the correct docking occur constantly.
now turn to the question of how to fill the tape foundations.It should not be casting parts.Your construction could be delayed as necessary to do a week's break, so that each layer has become solid.
If you have decided to do the construction of the house and do not know how to pour a foundation, then use our recommendations.
You should know that when casting strip foundation necessary to adhere to this principle."Basis" backs all the walls at home, and thus will be evenly distributed load on the "box".The concrete "ribbon" will be firmly bonded to the building ground.This will save you money when compared to installing a solid sole.
Knowing exactly how to pour the foundation, you can make a solid foundation.First you need to prepare the concrete.It consists of water, sand, gravel and cement.You can order ready-made solution.Remember that the brand of cement have to be 2 times higher than the output characteristics of the concrete.
So looks ready foundation.Now you can start building a house.
