Attic much more susceptible to cooling than other areas of the house, due to the fact that there is no over so-called "thermal cushion" that is, the area of contact with the environment it is much more than the other rooms.Therefore, many owners of residential loft are wondering - how to insulate the attic?This process must be approached with great care.Consider
than insulate the attic.As a heater used different materials: mineral wool, glass wool in bags, alabaster blocks, but it is best to insulate wood-fiber plates (DVP).Such a plate thickness of 12 mm in its thermal characteristics is a brick wall.MDF is also an excellent soundproofing material.
How to insulate a loft using MDF?Not so difficult, as fibreboard for insulation of walls, ceilings and floors do not require any additional material and time-consuming.Fiberboard have different thickness, easy to cut, because it is inherently soft and lightweight material.It is not deformed under the influence of moisture and temperature extremes.Incidentally, the fiberboard is convenient to hang wallpaper.
upholstery wooden walls of this material can perform the same person.Dimensions of plates are different.The average size of a plate - 250 to 122 cm. The length of the nails that hardboard nailed to the walls should not be less than 35 mm.Recommended hammer nails staggered.Hardboard nailed directly to the rafters.Nails should be galvanized.If the distance between the rafters is too large between impose additional bars to which is attached the Insulating material.Insulation panels must tightly adjoin to each other, the joints are sealed with a special material for insulation joints with tape or foil.
Obbit ceiling difficult.Plates applied to the ceiling and prop up their special T-shaped props.If the headliner is advisable to use protective eyewear for obvious reasons.For wiring in the MDF can cut grooves.
attic floor is insulated roofing felt and roofing material in two layers, which are applied hardboard M-20 or PT-100.A good insulation is a floor carpet that is often veiled sex in hotel rooms and corridors.Due to its special composition, which is impregnated with carpet, it can be easily cleaned with a damp cloth and a cleaning agent.Carpeted Floor Bustilat glued to fiberboard.
consider some points that will help you understand how to properly insulate the attic.Exterior work on the roof of the attic insulation should be carried out only in dry weather.Before upholstered fiberboard panels must carefully inspect the walls of the room.If the wall is made of wood, then it is necessary to process any antiseptic.Metal surfaces treated with anti-corrosive primer.If there damp places, they should be dried, if there is damage in the portion of the structure - replace them.
surface of the wall, which will break off material must be flat, whereas for air circulation will not be obstacles.If the wall is uneven, it is flattened by the lath.In this case insulation material between the roof and leave a gap of about 2 cm. The top and bottom of the roof makes the ventilation holes for every 10 square meters.meters.
How to insulate an attic by other means?For their installation often requires special tools.For example, to insulate the attic ecowool, need special installation, grinding the material stack and blew the particles between the cavities by means of a compressor.
Now you know how to insulate the attic with his own hands.
