If you have a loggia insulated in the winter garden or in the kitchen formed space, then you can think about how to make the bar yourself.
Can I replace the bar table
Some artists, looking at the inhabitants of America are trying to use this as a piece of furniture in the dining room table.Wooden rack can only be a supplement to the dining area, as in our country very different traditions.Behind the counter can not fit all the family members.But if you make this construction and to install it in the dining room, it is quite convenient to use for snacks and get-togethers with friends.
Features bar
wooden rack must have certain parameters, so its height can vary from 110 to 115 centimeters.This indicates that the need to produce stools or purchase given that they match a new piece of furniture.Seats must be sufficiently high, in addition, they should have a footrest.For the reason that the front will have enough wood impressive height, this feature will be available.Beneath the surface of the lid can be placed extra compartment for storage of alcoholic beverages, fruits, vegetables, and dishes.Do not forget about the top rack module, this part can also be made functional in this area can be set element, which will be able to hang the glasses and wine glasses.
Additions to construction
design can be supplemented by some constituents, among them there is a built-in key, designed bottle openers.This may be a bucket that you filled with ice, among other things, it will be possible to construct racks.If the wooden desk will be installed in a small kitchen, this piece of furniture do not make too high, as it will look out of place and will clutter up the space.In this case, preferable to construct the device on a folder structure which will act continuation dining table.Wooden rack supports and you can make advances.
Preparations
wooden rack independent production will differ from the expensive design, but it can bring to such devices, which are supplied with chrome elements.When working have to use DSP and sewers.
Training materials
In order to produce the work, you will need to prepare 6 sheets of chipboard, the dimensions of each of them must be equal 16x440x1150 mm.You will need a sheet of particleboard and 2 in the amount of pieces with other dimensions, namely 16h1000h2000 mm.
will be necessary, and rail with dimensions 20h40h4000 mm.
master will have to prepare the sewer pipes made of PVC, a diameter of 180 millimeters, while the length of this element must be equal to 950 millimeters.This blank form the basis of the legs of the rack.In order to manufacture the lamp housing, it is necessary to prepare the same tube, but it will be cut so that the length was equal to 450 millimeters.And will need a steel pipe diameter of 50 millimeters, its length should be equal to 1 meter, this element will form the basis of the horizontal leg supports.Wooden bar will be collected using a dowel 5x50 mm, such fasteners need 80 pieces.Prepare the appropriate style lamp and wires for him.Process design after production will be using colored lacquer, designed for use with PVC.Suitable work and acrylic paint and putty.Additional fasteners will screws that have countersunk head, their size must be equal to 4x60 mm and 4x80 mm.You must be reserved and dowels.
Preparation Tools
Installation of wooden racks must be done using a drill, drill, jigsaw, clamps, round file, spatula, paint brush, hacksaw, grinding bar and screwdriver.For the reason that the bar will have to have a high degree of reliability, parts should be the most durable, it indicates the need for an initial bonding together webs chipboard, eventually you have to get the plate, which is equal to the final thickness of 32 millimeters.It's worth noting that the two paintings, the dimensions of which are 16x440x1150 mm must remain unglued.
Implementation of cutting chipboard
If you need a wooden bar, then the DSP will need to prepare some of the elements, among them there is a circle whose diameter is 175 millimeters.In this preform in the central portion to prepare a hole through which the wiring will be stretched.It will be necessary to cut from the same material outdoor circle whose diameter is 500 millimeters.It needs a heel support, which is a circle with a diameter of 300 millimeters.Upstairs will be placed ceiling blend, which is represented by the ring, the outer diameter should be equal to 300 millimeters.The inner diameter of the workpiece to be equivalent to 180 millimeters.And cost required to prepare a frame intended for the bottom of the pipe, it will be two identical rings, the outer diameter of each of which is 240 millimeters, with regard to the inner diameter, it must be equal to 180 millimeters.If you need a wooden rack, with their own hands, you can make it, so you will need more and the wall, which will be located between the top and shelf, the workpiece is a band whose length is 870 millimeters, while the width - 240 millimeters.Prepare and lower and upper shelf.On one side of the plate 2, which is equal to the size 32x440x1150 mm, rounded to do.Once you back away from the edges 190 mm, and from the side edges 130 millimeters, it is possible to make a hole whose diameter is 180 millimeters, it is useful to set the vertical support tube.
Features countertops
Using one of the plates, the thickness of which is equal to 16 millimeters, it is necessary to make a cut-out as described above.This process would be a hole which should not be cross-cutting, it will set the vertical support.The next step is to consolidate the preform with an adhesive and a plate whose thickness is 16 millimeters.Then you can cut it out worktop.Once the items are glued together, they must be strengthened by means of clamps, the workpiece is completely dry, only then you can move on to the saw cut.
implementation of strut assembly
Wooden racks for flowers can be made on the same technology, moreover, these pieces of furniture can be used for different purposes.By making such a structure, the ends of the pieces need to clean up, then cover the filler and then sanded.Before you start the assembly, all the elements that are rounded, this also applies to plastic pipes must be painted or varnished in the two approaches.Between the layers is necessary to keep the time period that will be needed to complete drying of the composition.The assembly structures should begin with the fact that between the bottom shelf and countertop to install a vertical wall, the dimensions of which are of 240 x 870 millimeters.To do this, use a boring machine with a diameter of 5 millimeters.This element should take place in the central part of the countertop.Now it is possible to take a pipe whose diameter is 6 mm and the length is 450 millimeters, in order to make it more through holes.You must use a pipe which is designed for the luminaire.Performing data manipulation, you need to pull back from the edge of the workpiece 20 millimeters, while the diameter of the hole should be equal to 3 millimeters.
Now you can collect all the elements of the rack into a single unit, the support rails for the need to strengthen the ends of the shelves.The next step must be carried wooden rack mount.Then you can set the upper and lower shelves.Now you just paint everything.By staining the wood will look even more attractive, in addition, it will protect its texture, prolonging of life for years to come.The design will please you and you will enjoy the work done.
