How to paint the car yourself

click fraud protection

How to paint the car?Most will tell you that you just need to go to the car wash.But for a number of reasons, some drivers are not willing to do that.They prefer to solve these problems on their own.Maybe just do not have extra money, or they do not trust the masters.After repainting the car - a rather expensive pleasure.

If you are interested how to paint a car, then you should know that the process is performed independently by different manipulations, which are carried out by specialists.If you think that it is enough to throw cars and wait for the paint dries, you are greatly mistaken.You will need to produce trained to use some of the technology, the use of special tools and equipment.Only then you will understand how to paint the car.

Where do you start?First of all, it is necessary to thoroughly wash the car.On a clean drive you can consider all the defects of the body.After all, while driving, he and "bottom" auto "polished" with stones, sand grains and other things.

You will need to carry out preparatory work.And the procedure itself can be spot-painting, partial capital.All depends on the body damage.

So, if you needed a capital painting cars, you need to have patience.It takes a lot of time preparing the car for the procedure.You will need to remove the seals, locks, moldings - all of which can interfere with painting.Some prefer not to remove the above-mentioned items, but simply to stick their masking tape.It is not right.Under them will accumulate moisture, which can cause damage to the car in the future.Now we need to clean up the body of the car, then he puttied and primed.Without this you will not understand how to paint the car.

old paint, you have to take, and if there is corrosion centers, they should be treated.If we consider the process of preparing cars for painting, he has five stages:
1. Washing machine shampoo to remove impurities.
2. degreasing body.
3. Elimination of corrosive lesions required the removal of old paint by abrasive grinding, grinding paper using silicon carbide and aluminum dioxide.
4. Primary and secondary priming that allows you to create corrosion-resistant coating on the body.
5. Stage the enamel and lacquer.

Now you can understand how to paint a car.Select the material.If you're a fan of matte colors, buy a simple one-layer paint coatings.And for fans of glitter and shine in the sun produce coatings with metallic or pearl effect.

you need to put three layers of paint.Do this by spraying.Some elements of the cars will have to protect the paint from sticking to their paper, adhesive tape, adhesive.

necessary to dilute the paint to the viscosity was optimal.During the initial procedure, it is 26c.Four kilograms of soil used for six kilograms of enamel, while the proportion of solvent in the composition should be 20 percent of the total.You will need a gun.There must be filled up, and then apply the first coat.

For each structure you want to use a single spray or a gun, for example, paint, primer or putty.

You will need to choose a good gun, you can even adjust the pressure of the air flow, well and, of course, the shape of the torch and the amount of liquid.
After drying the first layer can be safely applied second, followed by a third.The composition of the enamel requires another.You may want to use a liquid paint.

If you know how to paint a car, the whole process will not take you more than two or three days.By following all the requirements of technology, you will be able to achieve elegant results.In any case, paint the car yourself is sometimes easier than paying for a lot of money in the service station.