Often when upgrading and repair of the computer to determine which memory is in the system unit or laptop.This action often causes difficulty for beginners, but nothing special for its implementation is not required.The article described a number of ways to help learn all about RAM used in PCs.
Key Features RAM
First we need to understand that it can be found by viewing the information on the memory:
- RAM type or generation (DDR1, DDR2 or DDR3).
- volume.It is measured in gigabytes.It determines how much data can be stored simultaneously in the RAM.
- number of modules, their manufacturer and serial number.
- Timings (Latency).Characterized by a delay that must occur during data transfer between different memory chips.The lower the timings, the better.
- frequency.It affects memory bandwidth.The higher the value, the faster and more stable operation of the computer.
- voltage.For the average user this feature does not play a big role.It is important mainly for practicing overclocking.
addition to these data, specialized software can give a lot of other information, but it is not so important.
AIDA64
One of the most popular application for viewing information about the "hardware" of the computer - AIDA64.After installing and running you will see the main program window.It consists of two parts.On the left the components in the form of a tree.In the right - table details.
How do I know what memory is to the PC using AIDA64?
- Click on the "+" next to the line "board".
- tab "Memory".Here at the top line contains the total amount of RAM.
- Then click on the item SPD.The screen displays details of each of the bars installed in the system.
At the bottom of the table there is a link.Clicking on it, you can see all the data on the module, which has a manufacturer's official website.
CPU-Z
CPU-Z - Still a popular application.The main advantage of the product - its use is absolutely free.You can download it from the manufacturer.No installation required.However, the program entirely in English.
- How do I know what memory is to the PC?Download and run the application.It represents one single window with multiple tabs.
- First click on the label Memory.It is possible to learn about what options work RAM now.
- Bookmark SPD report the values set by the manufacturer and on the information recorded in the chip RAM.And for each plank separately to switch to the next module, you should expand the menu under the label Memory Slot Selection.
As noted earlier, the interface is entirely in English, so you should give more information about each item, describing the RAM.
tab Memory:
- Size - the total amount of installed RAM.
- FSB: DRAM - relations system bus frequency to the frequency of RAM.
- CAS Latency, RAS to CAS Delay, RAS Precharge, Cycle Time, - timings.
- Frequency - Frequency.
Bookmark SPD:
- Module Size - the amount of separate strips of RAM, located in a particular slot.
- Max Bandwidth - the maximum frequency.
- Manufacturer - manufacturer.
- Serial Number - the serial number.
- Voltage - voltage.
PC Wizard
Like the previous two applications, PC Wizard is done in order to get the maximum information about the hardware installed inside a PC or laptop.The product is completely free, you can download it from the official site.It is desirable to select the ZIP-version instead of SETUP, because it does not require installation.
How do you know what RAM is in your computer?
- Run.Wait until it finishes scanning devices.
- Click on the icon in the form of a motherboard, which is located on the left side of the window.If the icon is not present, you must first click on the inscription "Iron".
- Now select "Physical Memory".Then in the bottom of the screen will display detailed information about RAM modules.
Speccy
This product is developed by a team working on the popular CCleaner.At home Speccy can operate for free.After downloading the application from the official website of his need to install.Installation is performed as simply as possible, the only thing you should pay attention - this is the choice of language.Menu options will appear on the first step, so it is very easy to miss.
How do you know what RAM is in your computer, c by Speccy?To do this, run the application and select the desired item in his window.It is called "RAM".In addition, to do anything not required.
HWiNFO
HWiNFO - small free but extremely powerful program.When downloading it, be careful, because there are two versions.One 32-bit, and the second - 64. Accordingly, the latter will not run under 32-bit operating system.Install the product is not required.
After starting you will see a small utility, which should push the RUN button and wait a few tens of seconds.Scan the system, the application will show the full details about it.
Where can I see what the RAM installed in the system unit?Pay attention to the bottom right corner of the window System Summary.There are two areas.Memory Modules shows information about each bar separately.Memory displays the total amount of RAM, the frequency at which the modules are working right now, and the real timings.
If the data is not enough, go to the window titled HWiNFO and double-click on the label Memory.
SiSoftware Sandra
SiSoftware Sandra - software which is primarily used for in-depth testing of the computer, however, to obtain information about the components of the system using it is also possible.To use the application you want to buy, but the manufacturer allows you to download from your site trial.
Before see what RAM is installed in the computer, perform the installation of the application.The process is simple, to cope with it even a novice.
After starting the application appears on the screen window with multiple tabs.Click the one that is called "Devices".Double click on the icon labeled "motherboard".In the table you can see the number of sub-headings called "Memory Module."Under each of them written information about the strips of RAM: The amount, type, serial number, manufacturer, frequency, timings, food, possible modes of operation.
obvious way
If the computer can not be turned, the software will not help.In this case it is necessary to investigate the physical device itself.Disconnect the computer from the network and remove the system cover.Open the latches that hold the bar of RAM, and then pull the unit itself.How to determine what memory is used in the computer?
right to RAM must be placed sticker.It is often applied to all essential data - volume, the maximum possible rate, the generation timings, voltage.If these data are not available, on the bar must be written in the serial number and model.For example: CMP4GX3M2C1600C7.To judge what lies behind the figures is often not possible, however, knowing the model of the module, it is easy to find out information about it by using any search engine.
For laptop users
first thing you should do is find out what the RAM installed in your laptop - view the user manual, which must be bundled.If detailed data it is not found, at least you can find out which model strips were installed at the factory.
users often ask questions such as: "User Guide lost like to see what my memory?"In this case, armed with a screwdriver.
Fully unplug the laptop: unplug it and remove the battery.Look at the back of the cabinet.It should be placed a few small caps.Usually RAM is hidden behind one of them.Others are used for quick replacement of ill-disk and other devices.It is difficult to guess, for what is hiding the necessary equipment, so loosen each turn until you find the one you want.
To remove the RAM unsnap the latches and easily pull the bar from the slot.When the free stroke is over, far from the contacts of the card should be lifted.About what kind of RAM in a notebook, as in the case of a desktop computer, to help find a sticker.Pull the memory of the laptop is not always required.If one unit, all the data from it can be considered by simply lifting the lid.
Be very careful and cautious when dealing with "iron".Even a small scratch or damage often leads to unstable PC.If you are not confident in their abilities, it's best to turn to professionals.This will save time and money.
