Today, trade can offer a lot of variety of models of scooters domestic and foreign manufacturers.Before a person wishing to purchase a vehicle, opens a huge selection.However, even with such an abundance of options not everyone finds what he likes.Someone not satisfied with the size and weight of the machine.He is looking for a more compact unit that can be placed, for example, in a car trunk.Someone thinks the design of modern "iron horses" attractive enough.He wants to show their creativity and build their own vehicle.These people are interested in how to make homemade moped.Here are some tips.
might need
To make homemade moped, we must first determine the details of which will be used during assembly.The basis of the structure in most cases appears unnecessary bicycle.Just need to consider, which will house all the details.The most cumbersome of them - is the engine.It is usually placed at the rear tailgate or the lower part of the frame.If the frame has such a structure that the placement of the engine will create an inconvenience when driving a moped, it can be done separately.This will require welding work.Cooking frame should be of bicycle parts, which are specifically designed for the corresponding load.You can change the geometry of the desired items.To do this, apply focus and car jack.The use of water pipes is strictly not allowed, as they do not have sufficient strength.This homemade moped is not gone.Bracing for the engine can be cut out of iron sheets with a minimum thickness of 5 mm and weld them to the frame.
Engine moped
Here craftsmen usually go separate ways.Some engines are used by farm machinery.For example, the mechanisms of power tillers or chainsaws.Other homemade moped collected using special bicycle engines.For example, the technique is popular among the Chinese engine series "D" or simply "Deshko."What to use - everyone decides sam.Vozmozhno, lying around in the closet of the old petrol engine saws and itching it somewhere to attach.It is necessary to put it in a homemade moped.However, the best advice here is to use the standard velomotor.So more assurance of its reliability.The engine must be installed on the prepared mount.If it uses a chain drive, the torque transmission is acceptable to use a standard bicycle sprocket.
Brakes
Optimally will install brake shoe type on the rear wheel.Due to the ease of all design powerful braking is required.The first tests of a new moped should be done with extreme caution.Fill it with fuel, it is necessary to begin to drive a few hundred meters, not much acceleration.When it is necessary to periodically test the braking system, making a short press on the handle.If all goes smoothly, the test can be considered successful.After that, the information about how to make a moped, you can share with your friends.
