best means for fast and reliable bonding of wood, plastic and metal elements is the glue "Moment".However, its connection quality often turn into a problem getting on your clothes or hands, the composition is also firmly embedded in the structure of the tissue or skin.So the question arises, how to remove the glue "Moment" with it.Many decide to act the usual conventional methods such as washing hands, but the use of soaps and shampoos to nothing lead.In order to completely eliminate the traces of dried glue, freeing themselves from the discomfort, you need to use special tools.
Removing
sunflower oil sunflower oil - the easiest method of getting rid of the glue.The operation is performed as follows: Lots of hands on who was the glue, it is necessary to moisten with oil and rub it into the skin, and then to begin the liquidation of bad coverage.It is advisable to wait to stronger oil permeated the surface of the skin, but for those who want to know how to remove the glue "Moment" with it quickly, not immediately try cleaning with a cotton swab.Previously it is necessary to moisten in oil to enhance the effect.Then the hands are washed with warm water and soap, which should also be as much as possible intensively rubbed into the soiled areas.
This method is affordable and relatively quick, but full of traces of glue, it saves only in the case of a thin layer of glue.If there is a question about what to wash the glue "Moment" with it, when it's already withered great spot, the oil may not help, or at least the cleansing process will be long.In such cases, it is better to start treatment more active drugs.
strong solvents
This option clean hands, perhaps, can be attributed to the most effective, but it has some drawbacks.The procedure used solvents such as acetone, white spirit or petrol purified.As can be seen, it means quite aggressive in terms of chemical exposure, but the question of how to remove the glue "Moment" from the skin of hands, no longer sure.It is desirable to use one of these formulations immediately after the soiled skin.For cleaning tools, you can use the same cotton pads, rubbing them by means of an adhesive interlayer.Speaking about the disadvantages of this method, it is possible to note the damage to the skin itself, a long reaction time and low efficiency in removing much of the hardened glue.
Anti-adhesive
fair to say that the producers adhesives in the same product lines include anti-money.The same applies to this claim, for example, there is an anti-glue "supermoment" that safely and effectively cleans the skin.At the same time there are instructions on how to remove the glue "Moment" from the hands of opposing special composition.
In general description of the sequence of this operation is as follows: The composition is applied to the sponge and the prior art process contaminated sites, and after a short time the foreign coating dissolves.Therefore, if you are supposed to work with binders, it is desirable to take care of the availability of such funds.In this case, no need to find or invent new ways to clean the glue "Moment" with it at home or at work, which may not be solvent, and even ordinary soap.
abrasives
The most radical way to get rid of adhesive contamination.If you want to clean material, metal products, wood, or plastic surfaces, such an option would be the most efficient and fast.But in the case of sensitive skin must be careful, as abrasives involve mechanical action on the treated area.Help in this case the following accessories: sandpaper (only with fine abrasive grains), pumice stone or nail file.Within a few minutes, even dried thick layers are removed, and the question of how to quickly remove the glue "Moment" with it, will be resolved with minimal effort.But again, be careful to act as abrasives inevitably affect the skin itself.
Removing adhesive nail
nails are considered the most problematic area in terms of the removal of the adhesive.The task is complicated, if in the course of treatment is necessary to save their aesthetic appearance.Therefore it is worth to contact the funds allocated for painless removal of varnish.Responding to a question on how to remove the glue "Moment" with the hands and, in particular, to the nails, you can bring funds from different ways: the abrasive and need a nail file for polishing and atsetonosoderzhaschy composition, and bottled water.
processing operation begins with the most "dirty" areas nail nail file.It is advisable to clean off only the adhesive without affecting the surface of the nail.Next, the fingers are immersed for 5 minutes in warm water, which will soften the remains ingrained coverage.Then with a cotton pad is necessary to moisten and cleanse the remaining tracks.In general, the procedures and techniques of how to remove glue "Moment" with it, the general principles have feedback.But in the case of nails requires a more intensive primary processing and softening procedure, after which the possible use of the same acetone and sunflower oil.The particular choice of method depends on the thickness and area accidentally pasted zone.
As it is not necessary to remove the glue?
than once mentioned that some of the funds can damage the skin, so abused for prompt achievement of results is not recommended.Also, do not try to tear off pieces of dried glue off the skin, it retains a solid structure and in close contact with the skin can seriously injure him.There is always something you can remove the glue "Moment" from hands safely and quickly, so the experiment should not be.Not all funds are used for household cleaning in the home, are appropriate for treatment of the skin of hands.This applies especially to acids, alkalis and rarely give the expected results, but hurt his hands.
care after cleaning
During removal of the adhesive coating on the skin can not do without microtrauma.Whether it is chemical attack or abrasive cleaning, soft tissue exposed to a severe test, after which it is necessary to restore them.In addition to knowledge of ways to remove the glue "Moment" with it, it is necessary to prepare and to further sessions in order to bring the treated areas.
first task immediately after cleaning - the removal of traces of processing substances or abrasive particles.To do this, wash hands with soap and water and then dry them.Then you can start reducing agents, including feeding creams, visceral fat, special hand lotions or regular vegetable oil.
